eISSN: 3087-4076 editor@aimjournals.com
All Journals
Submit your article

International Journal of Social Sciences and Humanity Development

Open Access Peer Review International
Open Access

About Some Properties of Arable Soil, A Layer of Cotton Fields

DOI https://doi.org/10.55640/ijsshd-v03i03-02
pdf
Temirov Isroil Gulomovich 1 , Rashidov Nurbek 1 ,
4 Candidate of Technical Sciences, Professor. Karshi State Technical University. Carshi. Republic of Uzbekistan
4 Candidate of Technical Sciences, Associate Professor. Karshi State Technical University. Carshi. Republic of Uzbekistan

Abstract

The article presents the results of a study of the physical and mechanical properties of the soil of the ridge, slope and middle of the cotton row. It is concluded that the study and application of the results obtained on the physical and mechanical properties of cotton soil in the development of rational technology and technical means for processing such soils is of great importance.

Keywords

Soil, row spacing, research

References

📄 Temirov I.G. Experimental studies of the effect of the relief of cotton fields on the uniformity of the plowing depth of a two-tier plow. ACADEMY Magazine, No. 2 (53), February 2020
📄 Temirov I.G. On some properties of the soil of the arable layer before its main processing for cotton. Young Scientist, International Scientific Journal No. 12 (116) / 2016. pp. 1096-1098
📄 Temirov I.G. Test results of a two-tier plow for plowing cotton soils. ACADEMY Magazine, No. 4 (43), April 2019
📄 Program and methodology of comprehensive research on the influence of running systems of agricultural tractors, combines and transportation equipment on the soil. Moscow: VIM, 1978.
📄 Mamatov F., Aldoshin N., Mirzaev B., Ravshanov H., Qurbonov Sh. and Rashidov N. Development of a frontal plow for smooth, furless plowing with cutoffs// IOP Conf. Series: Materials Science and Engineering 1030 (2021) 012135. – United Kingdom, 2021. doi:10.1088/1757-899X/1030/1/012135.
📄 Mamatov F., Umurzakov U., Mirzaev B., Rashidov N., Eshchanova G and Avazov I. Physical-mechanical and technological properties of eroded soils // E3S Web of Conferences 264, 04065 (2021). – France, 2020. doi.org/10.1051/e3sconf/202126404065.
📄 Khudayarov B., Mardonov Sh., Rashidov N., Sodikov X and Baratov D. Ripper for processing slope field // E3S Web of Conferences 264, 04034 (2021). – France, 2021. doi.org/10.1051/e3sconf/202126404034.
📄 Ravshanov, K., Fayzullaev, K., Ismoilov, I., Irgashev, D., Mamatov, S., & Mardonov, S. (2020, July). The machine for the preparation of the soil in sowing of plow crops under film. In IOP Conference Series: Materials Science and Engineering (Vol. 883, No. 1, p. 012138). IOP Publishing.
📄 Fayzullaev K. et al. Study on mechanisms of tillage for melon cultivation under the film //E3S Web of Conferences. – EDP Sciences, 2021. – Т. 304. – С. 03012.
📄 Fayzullayev K. et al. Raking plates of the combination machine's subsoiler //E3S Web of Conferences. – EDP Sciences, 2021. – Т. 264. – С. 04039.
📄 Irgashev D. et al. Placement of working bodies on the frame of the tool plow-ripper //E3S Web of Conferences. – EDP Sciences, 2023. – Т. 390. – С. 01036.
📄 Irgashev D., Mamadiyorov O., Xidirov M. Technical analysis of the disk working bodies that work the soil and them working between the garden row //Science and innovation. – 2022. – Т. 1. – №. A5. – С. 150-155.
📄 Irgashev D. B. Basing the Constructional Parameters of the Plug-Softener that Works Between the Garden Rows. – 2024.
📄 Mamatov F. et al. Justification of the bottom softening parameters of working organ with a sloping column //E3S Web of Conferences. – EDP Sciences, 2023. – Т. 434. – С. 03010.
📄 Mamatov F. et al. Justification of the bottom softening parameters of working organ with a sloping column //E3S Web of Conferences. – EDP Sciences, 2023. – Т. 434. – С. 03010.
📄 Irgashev Dilmurod Begmurodovich I. D. B. Theoretical Basis of Leveling Tillage in A Paraplow-Type Slanted-Column Chisel Plow //Theoretical Basis of Leveling Tillage in A Paraplow-Type Slanted-Column Chisel Plow. – 2025. – Т. 7. – №. 3. – С. 168-175.

Most read articles by the same author(s)

1 2 > >> 

Similar Articles

You may also start an advanced similarity search for this article.