eISSN: 3087-4300 editor@aimjournals.com
All Journals
Submit your article

International Journal of Renewable, Green, and Sustainable Energy

Open Access Peer Review International
Open Access

NUMERICAL AND EXPERIMENTAL INVESTIGATION OF A PACKED-BED LATENT HEAT THERMAL ENERGY STORAGE UNIT UTILIZING VARIOUS PARAFFIN PHASE CHANGE MATERIALS

DOI https://doi.org/10.55640/ijrgse-v02i06-01
PDF
Dr. Elias Martínez 1 ,
4 Thermal Energy and Building Performance Group, University of Zaragoza, Zaragoza, Spain

Abstract

The growing imperative for energy efficiency and sustainable resource management necessitates advanced thermal energy storage (TES) solutions to bridge the temporal mismatch between energy supply and demand. Latent Heat Thermal Energy Storage (LHTES) systems, leveraging the high energy density associated with the phase change of materials, offer a particularly promising avenue. This article presents a comprehensive study on a packed-bed LHTES unit, combining experimental measurements and numerical simulations to evaluate its performance when utilizing different paraffin-based Phase Change Materials (PCMs). The investigation details the design and construction of the experimental setup, the meticulous measurement techniques employed (with uncertainty analysis), and the development and validation of a Computational Fluid Dynamics (CFD) model. The study systematically examines the charging and discharging characteristics, heat transfer rates, and thermal efficiency for various paraffins under different operating conditions. Findings reveal significant differences in performance attributed to the thermophysical properties of the chosen PCMs. The validated numerical model further enables detailed parametric studies, providing critical insights into the underlying heat transfer mechanisms and offering practical guidance for optimizing packed-bed LHTES designs for enhanced energy storage and release, thereby contributing to the broader application of sustainable energy technologies.

Keywords

Packed-bed thermal energy storage, latent heat storage, phase change materials (PCMs)

References

Abedin, A.H., and M.A. Rosen. 2011. “A Critical Review of Thermochemical Energy Storage Systems.” The Open Renewable Energy Journal 4 (1): 42–46. https://doi.org/10.2174/1876387101004010042
Agyenim, F., N. Hewitt, P. Eames, and M. Smyth. 2010. “A Review of Materials, Heat Transfer and Phase Change Problem Formulation for Latent Heat Thermal Energy Storage Systems (LHTESS).” Renewable and Sustainable Energy Reviews 14 (2): 615–628. https://doi.org/10.1016/j.rser.2009.10.015
Arce, P., M. Medrano, A. Gil, E. Oró, and L.F. Cabeza. 2011. “Overview of Thermal Energy Storage (TES) Potential Energy Savings and Climate Change Mitigation in Spain and Europe.” Applied Energy 88 (8): 2764–2774. https://doi.org/10.1016/j.apenergy.2011.01.067
Avci, M., and M.Y. Yazici. 2013. “Experimental Study of Thermal Energy Storage Characteristics of a Paraffin in a Horizontal Tube-in-Shell Storage Unit.” Energy Conversion and Management 73: 271–277. https://doi.org/10.1016/j.enconman.2013.04.030
Buddhi, D., and R.L. Sawhney. 1994. “Proceeding of Thermal Energy Storage and Energy Conversion.” School of Energy and Environmental Studies. Devi Ahilya University, February 24–25, Indore, India.
Cabeza, L.F., A. Castell, C.D. Barreneche, A. De Gracia, and A.I. Fernández. 2011. “Materials Used as PCM in Thermal Energy Storage in Buildings: A Review.” Renewable and Sustainable Energy Reviews 15 (3): 1675–1695. https://doi.org/10.1016/j.rser.2010.11.018
Cabeza, L.F., I. Martorell, L. Miró, A.I. Fernández, and C. Barreneche. 2015. “Introduction to Thermal Energy Storage (TES) Systems.” In Advances in Thermal Energy Storage Systems Methods and Applications A volume in Woodhead Publishing Series in Energy Book, edited by Luisa F. Cabeza, 1–28. Woodhead Publishing.
Cárdenas, B., and N. León. 2013. “High Temperature Latent Heat Thermal Energy Storage: Phase Change Materials, Design Considerations and Performance Enhancement Techniques.” Renewable and Sustainable Energy Reviews 27: 724–737. https://doi.org/10.1016/j.rser.2013.07.028
COMSOL Documentation. 2022. “COMSOL Multiphysics® Simulation Software.” https://www.comsol.com/comsol-multiphysics.
Costa, S.C., and M. Kenisarin. 2022. “A Review of Metallic Materials for Latent Heat Thermal Energy Storage: Thermophysical Properties, Applications, and Challenges.” Renewable and Sustainable Energy Reviews 154: 111812. https://doi.org/10.1016/j.rser.2021.111812
Elias, C.N., and V.N. Stathopoulos. 2019. “A Comprehensive Review of Recent Advances in Materials Aspects of Phase Change Materials in Thermal Energy Storage.” Energy Procedia 161: 385–394. https://doi.org/10.1016/j.egypro.2019.02.101
European Commission. n.d. “Energy Storage.” https://energy.ec.europa.eu/topics/research-and-technology/energy-storage_en.
Fokaides, P.A., A. Kylili, and S.A. Kalogirou. 2015. “Phase Change Materials (PCMs) Integrated Into Transparent Building Elements: A Review.” Materials for renewable and sustainable energy 4 (2): 1–13. https://doi.org/10.1007/s40243-015-0047-8
Garg, H.P., S.C. Mullick, and A.K. Bhargava. 1985. Solar Thermal Energy Storage. Dordrecht: D. Reidel Publishing Co.
Gil, A., M. Medrano, I. Martorell, A. Lázaro, P. Dolado, B. Zalba, and L.F. Cabeza. 2010. “State of the Art on High Temperature Thermal Energy Storage for Power Generation. Part 1—Concepts, Materials and Modellization.” Renewable and Sustainable Energy Reviews 14 (1): 31–55. https://doi.org/10.1016/j.rser.2009.07.035
Hale, D.V., M.J. Hoover, and M.J. O’Neill. 1971. “Phase Change Materials Hand Book.” Report no. HREC- 5183-2LMSC-HREC D225138. NASA. Marshal Space Flight Center. Alabama.
He, X., J. Qiu, W. Wang, Y. Hou, M. Ayyub, and Y. Shuai. 2022. “A Review on Numerical Simulation, Optimization Design and Applications of Packed-bed Latent Thermal Energy Storage System with Spherical Capsules.” Journal of Energy Storage 51: 104555. https://doi.org/10.1016/j.est.2022.104555
Herrmann, U., B. Kelly, and H. Price. 2004. “Two-Tank Molten Salt Storage for Parabolic Trough Solar Power Plants.” Energy 29 (5-6): 883–893. https://doi.org/10.1016/S0360-5442(03)00193-2
Hyun, D.C., N.S. Levinson, U. Jeong, and Y. Xia. 2014. “Emerging Applications of Phase-Change Materials (PCMs): Teaching an Old Dog New Tricks.” Angewandte Chemie International Edition 53 (15): 3780–3795. https://doi.org/10.1002/anie.201305201
Isover. n.d. “Glass Wool.” https://www.isover-technical-insulation.com/glass-wool.
Jacob, R., W. Saman, M. Belusko, and F. Bruno. 2014. “Techno-Economic Analysis of Phase Change Material Thermal Energy Storage Systems in High Temperature Concentrated Solar Power Plants.” Asia-Pacific Solar Research Conference, Colombo Theatres, University of New South Wales, Sydney, Australia.
Jouhara, H., A. Żabnieńska-Góra, N. Khordehgah, D. Ahmad, and T. Lipinski. 2020. “Latent Thermal Energy Storage Technologies and Applications: A Review.” International Journal of Thermofluids 5: 100039. https://doi.org/10.1016/j.ijft.2020.100039
Kelly, B., and D. Kearney. 2006. “Thermal Storage Commercial Plant Design for a 2-Tank Indirect Molten Salt System.” NREL/SR-550040166.
Kibria, M.A., M.R. Anisur, M.H. Mahfuz, R. Saidur, and I.H.S.C. Metselaar. 2014. “Numerical and Experimental Investigation of Heat Transfer in a Shell and Tube Thermal Energy Storage System.” International Communications in Heat and Mass Transfer 53: 71–78. https://doi.org/10.1016/j.icheatmasstransfer.2014.02.023
Kiron, I.M. 2012. “Phase Change Materials (PCMs): Classification, Properties and Application.” https://textilelearner.net/phase-change-materials-pcms/#:~:text%E2%80%82=%E2%80%82Phase%20change%20materials%20(PCMs)%20materials,the%20application%20of%20technical%20textile.
Koohi-Fayegh, S., and M.A. Rosen. 2020. “A Review of Energy Storage Types, Applications and Recent Developments.” Journal of Energy Storage 27: 101047. https://doi.org/10.1016/j.est.2019.101047
Kylili, A., and P.A. Fokaides. 2016. “Life Cycle Assessment (LCA) of Phase Change Materials (PCMs) for Building Applications: A Review.” Journal of building engineering 6: 133–143. https://doi.org/10.1016/j.jobe.2016.02.008
Kylili, A., and P.A. Fokaides. 2017. “Numerical Simulation of Phase Change Materials for Building Applications: A Review.” Advances in building energy research 11 (1): 1–25. https://doi.org/10.1080/17512549.2015.1116465
Liu, M., N.S. Tay, S. Bell, M. Belusko, R. Jacob, G. Will, W. Saman, and F. Bruno. 2016. “Review on Concentrating Solar Power Plants and new Developments in High Temperature Thermal Energy Storage Technologies.” Renewable and Sustainable Energy Reviews 53: 1411–1432. https://doi.org/10.1016/j.rser.2015.09.026
Liu, Z., Y. Yao, and H. Wu. 2013. “Numerical Modeling for Solid–Liquid Phase Change Phenomena in Porous Media: Shell-and-Tube Type Latent Heat Thermal Energy Storage.” Applied Energy 112: 1222–1232. https://doi.org/10.1016/j.apenergy.2013.02.022
Magendran, S.S., F.S.A. Khan, N.M. Mubarak, M. Vaka, R. Walvekar, M. Khalid, E.C. Abdullah, S. Nizamuddin, and R.R. Karri. 2019. “Synthesis of Organic Phase Change Materials (PCM) for Energy Storage Applications: A Review.” Nano-structures & Nano-objects 20: 100399. https://doi.org/10.1016/j.nanoso.2019.100399
McLarnon, F.R., and E.J. Cairns. 1989. “Energy Storage.” Annual Review of Energy 14 (1): 241–271. https://doi.org/10.1146/annurev.eg.14.110189.001325
Mehling, H., and L.F. Cabeza. 2008. “Heat and Cold Storage with PCM.” Heat and Mass Transfer, 11–55. https://doi.org/10.1007/978-3-540-68557-9_2

Most read articles by the same author(s)

1 2 3 4 5 > >> 

Similar Articles

1-10 of 39

You may also start an advanced similarity search for this article.