eISSN: 3087-4319 editor@aimjournals.com
All Journals
Submit your article

International Journal of Next-Generation Engineering and Technology

Open Access Peer Review International
Open Access

ADVANCED GRAPHENE SYNTHESIS FROM SOLID POLYCYCLIC AROMATIC HYDROCARBONS VIA A CONTROLLED-ENVIRONMENT CRUCIBLE TECHNIQUE

DOI
PDF
Dr. Natalie R. Cheng 1 , Prof. Kenjiro Takamura 1 ,
4 Department of Materials Science and Nanoengineering Rice University, Houston, Texas, USA
4 Institute of Industrial Science The University of Tokyo, Tokyo, Japan

Abstract

Graphene, a two-dimensional material with exceptional electronic, mechanical, and thermal properties, holds immense promise for next-generation technologies. While various synthesis methods exist, challenges remain in achieving high-quality, large-area graphene reliably and cost-effectively. This article presents a novel approach for the synthesis of high-purity graphene from solid polycyclic aromatic hydrocarbons (PAHs) utilizing a sealed crucible technique. This method offers precise control over the precursor vapor environment, minimizing contamination and promoting uniform growth. We detail the experimental methodology, including precursor selection, crucible preparation, optimized growth parameters (temperature, pressure, duration), and comprehensive characterization techniques. Preliminary findings indicate the successful formation of few-layer, high-quality graphene films, as evidenced by Raman spectroscopy, scanning electron microscopy (SEM), and atomic force microscopy (AFM). The discussion delves into the potential growth mechanisms and compares this technique's advantages, such as simplicity, reduced gas consumption, and potential for direct growth on various substrates, against conventional methods. This controlled-environment crucible technique represents a promising avenue for scalable, high-quality graphene production, paving the way for its broader application in electronics, sensors, and energy storage devices.

Keywords

Graphene synthesis,, polycyclic aromatic hydrocarbons (PAHs)

References

Li, X., Cai, W., An, J., Kim, S., Nah, J., Yang, D., Piner, R., Velamakanni, A., Jung, I., Tutuc, E., Banerjee, S. K., Colombo, L., & Ruoff, R. S. (2009). Science, 324, 30.
Reina, A., Jia, X., Ho, J., Nezich, D., Son, H., Bulovic, V., Dresselhaus, M. S., & Kong, J. (2009). Nano Letters, 9, 30.
Zhao, L., Rim, K. T., Zhou, H., He, R., Heinz, T. F., Pinczuk, A., Flynn, G. W., & Pasupathy, A. N. (2011). Solid State Communications, 151, 509.
Lee, H. C., Jo, S. B., Lee, E., Yoo, M. S., Kim, H. H., Lee, S. K., Lee, W. H., & Cho, K. (2016). Advanced Materials, 28, 2010.
Sun, Z., Yan, Z., Yao, J., Beitler, E., Zhu, Y., & Tour, J. M. (2010). Nature, 468, 549.
Leem, J., Wang, M. C., Kang, P., & Nam, S. (2015). Nano Letters, 15, 7684.
Lee, M.-S., Lee, K., Kim, S.-Y., Lee, H., Park, J., Choi, K.-H., Kim, H.-K., Kim, D.-G., Lee, D.-Y., Nam, S., & Park, J.-U. (2013). Nano Letters, 13, 2814.
Kim, B. J., Jang, H., Lee, S.-K., Hong, B. H., Ahn, J.-H., & Cho, J. H. (2010). Nano Letters, 10, 3464.
Bhaviripudi, S., Jia, X., Dresselhaus, M. S., & Kong, J. (2010). Nano Letters, 10, 4128.
Hao, Y., Bharathi, M., Wang, L., Liu, Y., Chen, H., Nie, S., Wang, X., Chou, H., Tan, C., Fallahazad, B., Ramanarayan, H., Magnuson, C. W., Tutuc, E., Yakobson, B. I., McCarty, K. F., Zhang, Y.-W., Kim, P., Hone, J., Colombo, L., & Ruoff, R. S. (2013). Science, 342, 720.
Li, J., Chen, M., Samad, A., Dong, H., Ray, A., Zhang, J., Jiang, X., Schwingenschlögl, U., Domke, J., Chen, C., Han, Y., Fritz, T., Ruoff, R. S., Tian, B., & Zhang, X. (2022). Nature Materials, 21, 740.
Xu, X., Zhang, Z., Qiu, L., Zhuang, J., Zhang, L., Wang, H., Liao, C., Song, H., Qiao, R., Gao, P., Hu, Z., Liao, L., Liao, Z., Yu, D., Wang, E., Ding, F., Peng, H., & Liu, K. (2016). Nature Nanotechnology, 11, 930.
Wu, T., Zhang, X., Yuan, Q., Xue, J., Lu, G., Liu, Z., Wang, H., Wang, H., Ding, F., Yu, Q., Xie, X., & Jiang, M. (2016). Nature Materials, 15, 43.
Figueira-Duarte, T. M., & Mullen, K. (2011). Chemical Reviews, 111, 7260.
Zhuo, Q.-Q., Wang, Q., Zhang, Y.-P., Zhang, D., Li, Q.-L., Gao, C.-H., Sun, Y.-Q., Ding, L., Sun, Q.-J., Wang, S.-D., Zhong, J., & Sun, X.-H. (2015). ACS Nano, 9, 594.
Zhang, L., Cao, Y., Colella, N. S., Liang, Y., Brédas, J.-L., Houk, K. N., & Briseno, A. L. (2015). Accounts of Chemical Research, 48, 500.
Jiang, H., & Hu, W. (2020). Angewandte Chemie International Edition, 59, 1408.
Dong, H., Fu, X., Liu, J., Wang, Z., & Hu, W. (2013). Advanced Materials, 25, 6158.
Wang, Y., Zhao, R., & Ackermann, L. (2023). Advanced Materials, 35, 2300760.
Ma, C., Fang, P., & Mei, T.-S. (2018). ACS Catalysis, 8, 7179.
Li, Q., Zhang, Y., Xie, Z., Zhen, Y., Hu, W., & Dong, H. (2022). Journal of Materials Chemistry C, 10, 2411.
Cui, X., Xiao, C., Zhang, L., Li, Y., & Wang, Z. (2016). Chemical Communications, 52, 13209.
Aumaitre, C., & Morin, J. F. (2019). Chemical Record, 19, 1142.
Das, S., Bhauriyal, P., & Pathak, B. (2020). Journal of Physical Chemistry C, 125, 49.
Kairi, M. I., Khavarian, M., Bakar, S. A., Vigolo, B., & Mohamed, A. R. (2018). Journal of Materials Science, 53, 851.
Pattanshetti, A., Koli, A., Dhabbe, R., Yu, X. Y., Motkuri, R. K., Chavan, V. D., Kim, D. K., & Sabale, S. (2024). Macromolecular Rapid Communications, 45, 2300647.
Wu, T., Ding, G., Shen, H., Wang, H., Sun, L., Zhu, Y., Jiang, D., & Xie, X. (2013). Nanoscale, 5, 5456.

Most read articles by the same author(s)

<< < 1 2 3 4 5 6 7 8 9 10 > >> 

Similar Articles

1-10 of 29

You may also start an advanced similarity search for this article.