Open Access

Comprehensive Characterization and Optimization of Hybrid Biomass Briquettes Formulated from Low- and High-Density Wood Sawdust and Palm Kernel Shell Waste

https://doi.org/10.55640/ijrgse-v03i08-01

PDF

Budi Santoso ¹ , Siti Nurhaliza ¹ ,

⁴ Department of Sustainable Energy Systems, Universitas Indonesia, Indonesia

⁴ Faculty of Environmental Engineering, Institut Teknologi Bandung, Indonesia

Abstract

The increasing demand for sustainable and low-emission energy alternatives has intensified interest in biomass-derived solid fuels, particularly briquettes produced from agro-industrial residues. This study investigates the characterization and optimization of hybrid biomass briquettes formulated from low- and high-density wood sawdust blended with palm kernel shell (PKS) waste. The research focuses on evaluating the physicochemical, mechanical, and combustion properties of the composite fuel, with emphasis on how feedstock heterogeneity influences performance outcomes such as calorific value, density, moisture content, and combustion efficiency. Prior studies indicate that wood sawdust possesses favorable energy conversion potential, while palm kernel shells exhibit high carbon content and improved thermal stability, making their combination highly promising for densified biofuel applications (Alizadeh et al., 2023).

A structured review of densification processes, biomass blending strategies, and optimization approaches is integrated to establish a theoretical foundation for hybrid briquette formulation. Experimental design considerations, including compaction pressure, particle size distribution, and carbonization effects, are discussed to support performance optimization. The study further examines how hybridization enhances fuel stability compared to single-feedstock briquettes. Results from prior research demonstrate that optimized biomass mixtures significantly improve combustion rate, structural integrity, and energy density.

The findings highlight that hybrid briquetting not only improves waste valorization efficiency but also contributes to circular bioeconomy frameworks by converting lignocellulosic residues into value-added solid fuels. However, variability in feedstock composition and limited standardization in production parameters remain critical challenges. The study concludes that optimized hybrid biomass briquettes offer a viable pathway for decentralized renewable energy systems, particularly in regions with abundant agricultural and forestry residues.

Keywords

Biomass briquettes, palm kernel shell, sawdust densification

References

Alizadeh, P., Tabil, L. G., Mupondwa, E., Li, X., & Cree, D. (2023).

Technoeconomic feasibility of bioenergy production from wood sawdust. Energies, 16(4), 1914.

Alonge, O. I., & Obayopo, S. O. (2023a). Optimization study on carbonization of palm kernel shell using response surface method. International Journal of Integrated Engineering, 15(7).

Alonge, O. I., & Obayopo, S. O. (2023b). Thermogravimetric analysis of high- and low-density sawdust under nitrogen gas atmosphere. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 45(3), 8703–8715.

Alonge, O. I., Oloruntoba, O. A., Ogedengbe, T. S., Adedoja, A. M., & Akintola, I. A. (2024). Optimization and modelling of parameters on bio-char yield on low- and high-density sawdust for solid fuel. Journal of Renewable Energy and Environment, 11(3), 42-51.

Amrullah, M., Mardawati, E., Kastaman, R., & Suryaningsih, S. (2019). Study of bio-briquette formulation from mixture palm oil empty fruit bunches and palm oil shells. IOP Conference Series: Earth and Environmental Sciences, 443 (012079).

Anggraeni, S., Girsang, G. C. S., Nandiyanto, A. B. D., & Bilad, M. R. (2021). Effects of particle size and composition of sawdust/carbon from rice husk on the briquette performance, 16(3), 2298-2311.

Antwi-Boasiako, C., & Acheampong, B. B. (2016). Strength properties and calorific values of sawdust-briquettes as wood-residue energy generation source from tropical hardwoods of different densities. Biomass and Bioenergy, 85, 144–152.

Carrillo-Parra, A., Contreras-Trejo, J. C., Pompa-García, M., Pulgarín-Gámiz, M. Á., Rutiaga-Quiñones, J. G., Pámanes-Carrasco, G., & Ngangyo-Heya, M. (2020). Agro-pellets from oil palm residues/pine sawdust mixtures: relationships of their physical, mechanical and energetic properties, with the raw material chemical structure. Applied Sciences, 10(18), 6383.

Chikezie, A. O., & Adedeji, M. A. (2022). Comparative study of the burning rate of briquettes from some selected agricultural wastes. 4(9), 309-318.

Chukwu, M., Folayan, C. O., Pam, G. Y., & Obada, D. O. (2016). Characterization of some Nigerian coals for power generation. Journal of Combustion, 2016, 1–11.

Chukwuneke, J. L., Umeji, A. C., Sinebe, J. E., & Fakiyesi, O. B. (2020). Optimization of composition of selected biomass for briquette production. Universal Journal of Mechanical Engineering, 8(4), 227–236.

Costa, E. V. S., Pereira, M. P. D. C. F., Silva, C. M. S. D., Pereira, B. L. C., Rocha, M. F. V., & Carneiro, A. D. C. O. (2019). Torrefied briquettes of sugar cane bagasse and eucalyptus. Revista Árvore, 43(1), e430101.

Dragusanu, V., Lunguleasa, A., Spirchez, C., & Scriba, C. (2023). Some properties of briquettes and pellets obtained from the biomass of energetic willow (Salix viminalis L.) in comparison with those from oak (Quercus robur). Forests, 14(6), 1134.

Effendi, S., Syarif, A., & Rusnadi, I. (2023). Characteristics of bio-briquette mixture of char gasified coal and torrefied coconut shell as fuel co-firing. Atlantis Highlights in Engineering, 14, 162–171.

Elehinafe, F. B., Okedere, O. B., Fakinle, B. S., & Sonibare, J. A. (2017). Assessment of sawdust of different wood species in Southwestern Nigeria as source of energy. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 39(18), 1901–1905.

Eling, J., Okot, D. K., Menya, E., & Atim, M. R. (2024). Densification of raw and torrefied biomass: A review. Biomass and Energy, 184(107210).

Essien, U. A., Oke, P. K., Bamisaye, S. O., & Anunuso, J. C. (2018). Development of a model for selecting the required compaction pressure of heterogenous briquettes of agricultural wastes. Faculty of Engineering, Ahmadu Bello University, Zaria, National Engineering Conference., 69, 238–242.

Hansted, A. L. S., Boschert, C., Hawboldt, K. A., Newell, W. J., & Yamaji, F. M. (2024). Impact of densification process on unprocessed biomass and post-hydrothermal carbonization. Biomass and Bioenergy, 184, 107203.

Hassan, L. G., Sani, N. A., Sokoto, A. M., & Tukur, U. G. (2018). Comparative studies of burning rates and water boiling time of wood charcoal and briquettes produced from carbonized martynia annua woody shells. Nigerian Journal of Basic and Applied Sciences, 25(2), 21.

Itoh, T., Fujiwara, N., Iwabuchi, K., Narita, T., Mendbayar, D., Kamide, M., Niwa, S., & Matsumi, Y. (2020). Effects of pyrolysis temperature and feedstock type on particulate matter emission characteristics during biochar combustion. Fuel Processing Technology, 204, 106408.

Most read articles by the same author(s)

<< < 1 2 3 4 5 > >>

International Journal of Renewable, Green, and Sustainable Energy

Comprehensive Characterization and Optimization of Hybrid Biomass Briquettes Formulated from Low- and High-Density Wood Sawdust and Palm Kernel Shell Waste

Abstract

Keywords

References

Most read articles by the same author(s)

Similar Articles