eISSN: 3087-4300 editor@aimjournals.com
All Journals
Submit your article

International Journal of Renewable, Green, and Sustainable Energy

Open Access Peer Review International
Open Access

Integrated Thermoelectric–Heat Pipe Framework for Enhanced Waste Heat Recovery in Dual-Fuel Diesel Engine Systems

DOI https://doi.org/10.55640/
PDF
Dr. Rahul S. Verma 1 , Prof. Pooja A. Kulkarni 1 ,
4 Department of Computer Science and Engineering, National Institute of Digital Technology India
4 Department of Electronics and Communication Engineering, Institute of Modern Engineering Research India

Abstract

The recovery of waste heat from internal combustion engines has emerged as a critical strategy for improving energy efficiency and reducing emissions in modern energy systems. Dual-fuel diesel engines, while offering flexibility in fuel utilization, exhibit significant thermal losses through exhaust gases. This study proposes an integrated thermoelectric–heat pipe framework designed to enhance waste heat recovery efficiency in such systems. The framework combines thermoelectric generators (TEGs) with heat pipe-based thermal management to optimize temperature gradients and energy conversion efficiency. A structured methodological approach involving thermodynamic modeling, heat transfer optimization, and system-level integration is developed. The proposed system is analyzed under varying engine operating conditions, with particular emphasis on exhaust temperature profiles and dual-fuel combustion characteristics. Results indicate that the integration of heat pipes significantly improves heat flux distribution, leading to enhanced thermoelectric performance. The study demonstrates that optimized coupling of heat pipes and TEG modules can increase energy recovery efficiency while maintaining engine performance stability. The findings contribute to the development of advanced hybrid energy recovery systems and highlight the potential of integrated thermal technologies in next-generation engine architectures.

Keywords

Waste Heat Recovery, Thermoelectric Generator, Heat Pipe Integration

References

F. P. Brito, J. Martins, L. M. Goncalves, N. Antunes, and D. Sousa, “ Influence of heat pipe operating temperature on exhaust heat thermoelectric generation,” SAE Int. J. Passeng. Cars- Mech. Syst 6(2), 652–664 (2013). https://doi.org/10.4271/2013-01-0559
Q. Cao, W. Luan, and T. Wang, “ Performance enhancement of heat pipes assisted thermoelectric generator for automobile exhaust heat recovery,” Appl. Therm. Eng. 130, 1472–1479 (2018). https://doi.org/10.1016/j.applthermaleng.2017.09.134
J. Chen, L. Zuo, Y. Wu, and J. Klein, “ Modeling, experiments and optimization of an on-pipe thermoelectric generator,” Energy Convers. Manage. 122, 298–309 (2016). https://doi.org/10.1016/j.enconman.2016.05.087
X. Gou, H. Xiao, and S. Yang, “ Modeling, experimental study and optimization on low-temperature waste heat thermoelectric generator system,” Appl. Energy 87, 3131–3136 (2010). https://doi.org/10.1016/j.apenergy.2010.02.013
L. M. Goncalves, J. Martins, J. Antunes, R. Rocha, and F. P. Brito, “ Heat-pipe assisted thermoelectric generators for exhaust gas applications,” ASME Int. Mech. Eng. Congr. Expo. 44298, 1387–1396 (2010). https://doi.org/10.1115/IMECE2010-40926
M. N. H. M. Hilmin, M. F. Remeli, B. Singh, and N. D. N. Affandi, “ Thermoelectric power generations from vehicle exhaust gas with TiO2 nanofluid cooling,” Therm. Sci. Eng. Prog. 18, 100558 (2020). https://doi.org/10.1016/j.tsep.2020.100558
J.-C. Jang, R.-G. Chi, S.-H. Rhi, K.-B. Lee, H.-C. Hwang, J.-S. Lee et al, “ Heat pipe-assisted thermoelectric power generation technology for waste heat recovery,” J. Electron. Mater. 44, 2039–2047 (2015). https://doi.org/10.1007/s11664-015-3653-4
H. Jouhara, N. Khordehgah, S. Almahmoud, B. Delpech, A. Chauhan, and S. A. Tassou, “ Waste heat recovery technologies and applications,” Therm. Sci. Eng. Prog. 6, 268–289 (2018). https://doi.org/10.1016/j.tsep.2018.04.017
S.-K. Kim, B.-C. Won, S.-H. Rhi, S.-H. Kim, J.-H. Yoo, and J.-C. Jang, “ Thermoelectric power generation system for future hybrid vehicles using hot exhaust gas,” J. Electron. Mater. 40, 778–783 (2011). https://doi.org/10.1007/s11664-011-1569-1
N. Khayum, S. Anbarasu, and S. Murugan, “ A role of the combined effect of fuel injection parameters on a dual fuel diesel engine,” Mater. Today Proc. 47, 2726–2736 (2021). https://doi.org/10.1016/j.matpr.2021.03.042
N. Khayum, S. Anbarasu, and S. Murugan, “ Experimental investigation of a biogas-fueled diesel engine at different biogas flow rates,” in Proceedings of the 7th International Conference on Advances in Energy Research ( Springer, Singapore, 2021), pp. 913–921.
S. Lv, W. He, Q. Jiang, Z. Hu, X. Liu, H. Chen et al, “ Study of different heat exchange technologies influence on the performance of thermoelectric generators,” Energy Convers. Manage. 156, 167–177 (2018). https://doi.org/10.1016/j.enconman.2017.11.011
B. Orr, A. Akbarzadeh, M. Mochizuki, and R. Singh, “ A review of car waste heat recovery systems utilising thermoelectric generators and heat pipes,” Appl. Therm. Eng. 101, 490–495 (2016). https://doi.org/10.1016/j.applthermaleng.2015.10.081
K. K. Pandey, “ Application of acetylene in multi-cylinder low heat rejection diesel engine fueled with ternary blend,” Energy 311, 133368 (2024). https://doi.org/10.1016/j.energy.2024.133368
K. K. Pandey, “ Study on the integration of hydrogen in a multi-cylinder low heat rejection diesel engine using a ternary blend,” Atmos. Pollut. Res. 15, 102250 (2024). https://doi.org/10.1016/j.apr.2024.102250
K. K. Pandey and M. Sivalingam, “ Investigation of low heat rejection diesel engine run on N,N′-diphenyl-p-phenylenediamine antioxidant doped Jatropha methyl ester-diesel blend,” Environ. Prog. Sustainable Energy 42, e14056 (2022). https://doi.org/10.1002/ep.14056
K. K. Pandey, N. Khayum, and J. H. Shaik, “ Comparison of machine learning algorithms on a low heat rejection diesel engine running on ternary blends,” J. Renewable Sustainable Energy 16, 053101 (2024). https://doi.org/10.1063/5.0230274
K. K. Pandey and S. Murugan, “ Albizia lebbeck leaf extracted natural antioxidant doped biodiesel-diesel blend in low heat rejection diesel engine,” J. Renewable Sustainable Energy 15, 13101 (2023). https://doi.org/10.1063/5.0107664
R. Patowary and D. C. Baruah, “ Thermoelectric conversion of waste heat from IC engine‐driven vehicles: A review of its application, issues, and solutions,” Int. J. Energy Res. 42, 2595–2614 (2018). https://doi.org/10.1002/er.4021
N. P. Reddy, N. Khayum, and D. Uppara, “ Effect of different geometrical changes in the intake manifold of a DI diesel engine fueled with biodiesel-diesel blends,” SAE Paper No. 2020-01-0346, 2020.
P. Niklesh Reddy, N. Khayum, S. K. Paruvada, A. Killol, and S. Murugan, “ Experimental study on combustion characteristics of a CI engine runs on a renewable fuel,” Int. J. Ambient Energy 43, 2003–2018 (2022). https://doi.org/10.1080/01430750.2020.1722743
R. Saxena, P. Pachorkar, A. Jain, H. Majumder, K. K. Pandey, S. K. Mishra et al, “ Performance enhancement of solar air heater using artificial roughness,” Mater. Today Proc. (published online). https://doi.org/10.1016/j.matpr.2023.05.012
W. Srimuang and P. Amatachaya, “ A review of the applications of heat pipe heat exchangers for heat recovery,” Renewable Sustainable Energy Rev. 16, 4303–4315 (2012). https://doi.org/10.1016/j.rser.2012.03.030
S. Wu, Y. Ding, C. Zhang, and D. Xu, “ Improving the performance of a thermoelectric power system using a flat-plate heat pipe,” Chin. J. Chem. Eng. 27, 44–53 (2019). https://doi.org/10.1016/j.cjche.2018.03.019
Y. Zhang, “ Thermoelectric advances to capture waste heat in automobiles,” ACS Energy Lett. 3, 1523–1524 (2018). https://doi.org/10.1021/acsenergylett.8b00749

Most read articles by the same author(s)

<< < 1 2 3 4 5 > >> 

Similar Articles

1-10 of 25

You may also start an advanced similarity search for this article.