Optimized Prediction of Punching Shear Capacity in Reinforced Concrete Slabs: A Metaheuristic Machine Learning Approach
Abstract
Background: Accurate prediction of punching shear capacity is critical for the safety and reliability of reinforced concrete (RC) flat slab structures, yet conventional empirical code provisions often exhibit significant scatter. While Machine Learning (ML) models, such as Artificial Neural Networks (ANN), have shown promise, their performance is highly dependent on effective hyper-parameter tuning, a process often neglected in prior studies.
Objective: This study aims to develop a novel, highly robust, and accurate predictive model for the punching shear capacity of RC slabs by integrating an ANN with a systematic Metaheuristic Optimization approach.
Methods: An extensive experimental database was compiled from the literature. A Genetic Algorithm (GA) was employed to optimize the key hyper-parameters (e.g., network architecture, learning rate) of the ANN model, creating a GA-ANN hybrid model. The GA's fitness function was defined to minimize the Mean Absolute Error (MAE) on a dedicated validation set. Model performance was evaluated on an independent testing set using statistical metrics, including, MAE, and RMSE, and compared against non-optimized baseline models and established design codes.
Results: The GA-ANN model achieved significantly superior predictive accuracy on the testing set ( of 0.957 , MAE of 14.5 kN) compared to the baseline ANN and conventional code methods. The optimization process successfully determined a globally efficient set of hyper-parameters, resulting in notably reduced scatter and bias in the prediction-to-actual ratio. Comparative analysis demonstrated the model’s CoV (0.110) was substantially lower than ACI 318 (0.295) and Eurocode 2 (0.225), proving its uniform reliability across various material and geometric ranges.
Conclusion: The integration of metaheuristic optimization, specifically the Genetic Algorithm, provides a powerful and necessary framework for developing highly reliable machine learning models in structural engineering. The resulting GA-ANN model offers a superior, data-driven alternative for the robust and efficient estimation of punching shear capacity in RC slabs.
Keywords
References
Most read articles by the same author(s)
- Dr. Rhys A. Vardon, Prof. Elena K. Petrov, Performance Engineering and Intelligent Automation in Cloud-Accelerated and Data-Intensive Enterprise Architectures: A Synthesis of Emerging Trends , International Research Journal of Advanced Engineering and Technology: Vol. 2 No. 10 (2025): Volume 02 Issue 10
- Dr. Puneet Garg, Accident Risk Prediction Using Artificial Intelligence-Based Intelligent Transportation Systems , International Research Journal of Advanced Engineering and Technology: Vol. 3 No. 07 (2026): Volume 03 Issue 07
- Prof. Priyank Mehta, SECURING CLOUD ENVIRONMENTS WITH HOMOMORPHIC ENCRYPTION , International Research Journal of Advanced Engineering and Technology: Vol. 1 No. 1 (2024): Volume 01 Issue 01 2024
- Sesha Sai Sravanthi Valiveti, AI-Driven Behavioral Biometrics for 401(k) Account Security , International Research Journal of Advanced Engineering and Technology: Vol. 2 No. 06 (2025): Volume 02 Issue 06
- Dr. Chen Wei-Liang, Influence of Apertures on Dynamic Energy Dissipation in Thin-Walled Tubular Structures Under Impact , International Research Journal of Advanced Engineering and Technology: Vol. 2 No. 05 (2025): Volume 02 Issue 05
- Dr. Elias R. Vance, Prof. Coraline Q. Harthwick, A Cloud-Native Microservice Architecture for Scalable Real-Time Geohazard Monitoring: An Assessment of Predictive Model Insufficiency Amidst Increasing Seismic Events , International Research Journal of Advanced Engineering and Technology: Vol. 2 No. 09 (2025): Volume 02 Issue 09
- Dr. Prakash Kumar, INVESTIGATING THE EFFECT OF WELDING CONDITIONS ON THE TENSILE STRENGTH OF GMAW JOINTS , International Research Journal of Advanced Engineering and Technology: Vol. 1 No. 1 (2024): Volume 01 Issue 01 2024
- Michael Lee, David Zhang, FROM INSPECTION TO INNOVATION: THE GROWTH OF STRUCTURAL HEALTH MONITORING IN MODERN ENGINEERING , International Research Journal of Advanced Engineering and Technology: Vol. 2 No. 03 (2025): Volume 02 Issue 03
- Dr. Parth Gautam, IOT and AI-Based Automatic Crash Detection Systems for Emergency Services: A Review , International Research Journal of Advanced Engineering and Technology: Vol. 3 No. 07 (2026): Volume 03 Issue 07
- Dr. Dakota Johnson, ADVANCED MULTI-ATTRIBUTE DECISION-MAKING: A PICTURE FUZZY EINSTEIN OPERATOR AND TOPSIS APPROACH , International Research Journal of Advanced Engineering and Technology: Vol. 2 No. 04 (2025): Volume 02 Issue 04
Similar Articles
- Rohan Mehta, Ananya Sharma, Hybrid Machine Learning Framework for Real-Time Prediction and Optimization of Chlorine Residual Levels in Water Distribution Systems , International Research Journal of Advanced Engineering and Technology: Vol. 3 No. 07 (2026): Volume 03 Issue 07
- Dr. Sultan Al-Otaibi, Dr. Laila Al-Mansour, Development and 3D Printing of Mechanically Tunable Origami Architectures via Fused Deposition Modeling for Structural Engineering Applications , International Research Journal of Advanced Engineering and Technology: Vol. 3 No. 05 (2026): Volume 03 Issue 05
- Dr. Saud Al-Qahtani, Dr. Fatimah Al-Shehri, Development of a Smart Mechanized Kuih Ros Production System with Integrated Yield Monitoring and Process Optimization , International Research Journal of Advanced Engineering and Technology: Vol. 3 No. 05 (2026): Volume 03 Issue 05
- R. ARUN KUMAR, STRATEGIES FOR EFFICIENT AND SECURE BROADCASTING IN WIRELESS AD HOC NETWORKS , International Research Journal of Advanced Engineering and Technology: Vol. 1 No. 1 (2024): Volume 01 Issue 01 2024
- Prof. Michael T. Roberts, OPTIMIZING OPEN HARDWARE FOR SOLAR PHOTOVOLTAIC RACKING: A GEOGRAPHICAL CASE STUDY APPROACH , International Research Journal of Advanced Engineering and Technology: Vol. 2 No. 02 (2025): Volume 02 Issue 02
- Krishna Chaitanya Mamidala, AI-Augmented Functional Safety Evidence Validation for ISO 26262 Automotive Systems , International Research Journal of Advanced Engineering and Technology: Vol. 3 No. 11 (2026): Volume03 Issue11
- Dr. Elara V. Quinn, Prof. Jian W. Lin, GENERATIVE ARTIFICIAL INTELLIGENCE IN EDUCATIONAL CONTEXTS: A SYSTEMATIC REVIEW OF OPPORTUNITIES, CHALLENGES, AND ETHICAL IMPLICATIONS , International Research Journal of Advanced Engineering and Technology: Vol. 2 No. 10 (2025): Volume 02 Issue 10
- Kodirov Shokhrukh, The Impact of AI Automation on Reducing Operating Costs and Improving Decision-Making Accuracy in Enterprise Platforms , International Research Journal of Advanced Engineering and Technology: Vol. 2 No. 11 (2025): Volume 02 Issue 11
- Dr. Parth Gautam, IOT and AI-Based Automatic Crash Detection Systems for Emergency Services: A Review , International Research Journal of Advanced Engineering and Technology: Vol. 3 No. 07 (2026): Volume 03 Issue 07
- Dr. Puneet Garg, Accident Risk Prediction Using Artificial Intelligence-Based Intelligent Transportation Systems , International Research Journal of Advanced Engineering and Technology: Vol. 3 No. 07 (2026): Volume 03 Issue 07
You may also start an advanced similarity search for this article.