eISSN: 3087-4068 editor@aimjournals.com
All Journals
Submit your article

International Research Journal of Advanced Engineering and Technology

Open Access Peer Review International
Open Access

Optimized Prediction of Punching Shear Capacity in Reinforced Concrete Slabs: A Metaheuristic Machine Learning Approach

DOI
pdf
Dr. Elias M. Novak 1 , Prof. Anya P. Vasilieva 1 , Dr. Kenji T. Sato 1 ,
4 Department of Civil and Structural Engineering, Technical University of Vienna, Vienna, Austria
4 Faculty of Computational Mechanics, Lomonosov State Engineering Institute, Moscow, Russia
4 Division of Advanced Materials Science, Kyoto Institute of Technology, Kyoto, Japan

Abstract

Background: Accurate prediction of punching shear capacity is critical for the safety and reliability of reinforced concrete (RC) flat slab structures, yet conventional empirical code provisions often exhibit significant scatter. While Machine Learning (ML) models, such as Artificial Neural Networks (ANN), have shown promise, their performance is highly dependent on effective hyper-parameter tuning, a process often neglected in prior studies.

Objective: This study aims to develop a novel, highly robust, and accurate predictive model for the punching shear capacity of RC slabs by integrating an ANN with a systematic Metaheuristic Optimization approach.

Methods: An extensive experimental database was compiled from the literature. A Genetic Algorithm (GA) was employed to optimize the key hyper-parameters (e.g., network architecture, learning rate) of the ANN model, creating a GA-ANN hybrid model. The GA's fitness function was defined to minimize the Mean Absolute Error (MAE) on a dedicated validation set. Model performance was evaluated on an independent testing set using statistical metrics, including, MAE, and RMSE, and compared against non-optimized baseline models and established design codes.

Results: The GA-ANN model achieved significantly superior predictive accuracy on the testing set ( of 0.957 , MAE of 14.5 kN) compared to the baseline ANN and conventional code methods. The optimization process successfully determined a globally efficient set of hyper-parameters, resulting in notably reduced scatter and bias in the prediction-to-actual ratio. Comparative analysis demonstrated the model’s CoV (0.110) was substantially lower than ACI 318 (0.295) and Eurocode 2 (0.225), proving its uniform reliability across various material and geometric ranges.

Conclusion: The integration of metaheuristic optimization, specifically the Genetic Algorithm, provides a powerful and necessary framework for developing highly reliable machine learning models in structural engineering. The resulting GA-ANN model offers a superior, data-driven alternative for the robust and efficient estimation of punching shear capacity in RC slabs.

Keywords

Punching Shear, Metaheuristic Optimization, Genetic Algorithm (GA), Artificial Neural Network (ANN)

References

Richard C. Elstner and Eivind Hognestad Shearing Strength of Reinforced Concrete Slabs Journal
Proceedings Volume: 53
The Maximum Punching Shear Resistance of Flat Slabs Jaroslav Halvonik Part of special
issue:CONCRETE AND CONCRETE STRUCTURES 2013 - 6th International Conference, Slovakia
Effect of degree of corrosion on the properties of reinforcing steel bars Abdullah A.Almusallam Construction and Building Materials Volume 15, Issue 8, December 2001 Advances in Engineering: An International Journal (ADEIJ), Vol.3, No.417
Fiber-reinforced polymer composites in strengthening reinforced concrete structures: A criticalreview MZ Naser, RA Hawileh, JA Abdalla - Engineering Structures, 2019 - Elsevier
Fiber-reinforced polymers bars for compression reinforcement: A promising alternative to steel bars
N Elmessalami, A El Refai, F Abed - Construction and Building Materials, 2019 - Elsevier
Punching of RC slabs under eccentric loads M Farzam, NA Fouad, J Grünberg - StructuralConcrete, 2010 - icevirtuallibrary.com
Application of an analytical method for the design for robustness of RC flat slab buildings PMartinelli, M Colombo, S Ravasini, B Belletti - Engineering Structures, 2022 - Elsevier
Parate, H., Kishore Bandela, & Paniteja Madala. (2025). Quantity Take-Off Strategies: Reducing Errors in Roadway Construction Estimation. Journal of Mechanical, Civil and Industrial Engineering, 6(3), 01-09. https://doi.org/10.32996/jmcie.2025.6.3.1
Applications of machine learning to BIM: A systematic literature review A Zabin, VA González, Y
Zou, R Amor - Advanced Engineering Informatics, 2022 - Elsevier
Damage assessment of RC flat slabs partially collapsed due to punching shear T Cosgun, B Sayin -International Journal of Civil Engineering, 2018 - Springer
Ultimate punching shear strength analysis of slab–column connections DD Theodorakopoulos, RNSwamy - Cement and Concrete Composites, 2002 - Elsevier
Prediction of punching shear capacity of RC flat slabs using artificial neural network NA Safiee, A Ashour - Asian Journal of Civil Engineering, 2017 - sid.ir
Mangalathu, Sujith, Hanbyeol Shin, Eunsoo Choi, & Jong-Su Jeon, (2021) "Explainable machine learning models for punching shear strength estimation of flat slabs without transverse reinforcement", Journal of Building Engineering, Vol. 39, pp 102300.
Shen, Yuanxie, Linfeng Wu, & Shixue Liang, (2022) "Explainable machine learning-based model fo failure mode identification of RC flat slabs without transverse reinforcement", Engineering Failure Analysis,Vol. 141, pp 106647.
Lu, Shasha, Mohammadreza Koopialipoor, Panagiotis G. Asteris, Maziyar Bahri, & Danial Jahed Armaghani, (2020) "A novel feature selection approach based on tree models for evaluating the punching shear capacity of steel fiber-reinforced concrete flat slabs", Materials, Vol. 13, pp 173902.
Vu, Duy-Thang, & Nhat-Duc Hoang, (2016) "Punching shear capacity estimation of FRP-reinforced concrete slabs using a hybrid machine learning approach", Structure and Infrastructure Engineering,Vol. 12, no. 9, pp 1153-1161.
Hoang, Nhat-Duc, (2019) "Estimating punching shear capacity of steel fibre reinforced concrete slabs using sequential piecewise multiple linear regression and artificial neural network", Measurement,Vol. 137, pp 58-70.
Doğan, Gamze, & Musa Hakan Arslan, (2022) "Determination of Punching Shear Capacity of Concrete Slabs Reinforced with FRP Bars Using Machine Learning", Arabian Journal for Science and Engineering, pp 1-27.
Song, Junho, Won-Hee Kang, Kang Su Kim, & Sungmoon Jung, (2010) "Probabilistic shear strength models for reinforced concrete beams without shear reinforcement", Structural engineering & mechanics, Vol. 11, no. 1, pp 15.
Comparative Analysis of Diagrid Structural System and conventional structural system for high rise steel building H Varsani, N Pokar, D Gandhi - International Journal of Advance , 2015 -academia.edu
Simplified diverse embedment model for steel fiber-reinforced concrete elements in tension SC Lee, JY Cho, FJ Vecchio - Materials Journal, 2013 vectoranalysisgroup.com
Analysis of precision of geodetic instruments for investigating vertical displacement of structures B
Kovačič, A Pustovgar, N Vatin - Procedia engineering, 2016 - Elsevier
Dynamic stability of suddenly loaded structures GJ Simitses - 2012 - books.google.com
Ultimate punching shear strength analysis of slab–column connections DD Theodorakopoulos, RNSwamy - Cement and Concrete Composites, 2002 - Elsevier
Durgam, S. (2025). CICD automation for financial data validation and deployment pipelines. Journal of Information Systems Engineering and Management, 10(45s), 645–664. https://doi.org/10.52783/jisem.v10i45s.8900
A general regression neural network DF Specht - IEEE transactions on neural networks, 1991 -academia.edu
How neural networks learn from experience GE Hinton - Scientific American, 1992 - JSTOR
The backpropagation algorithm R Rojas - Neural networks, 1996 - Springer
Genetic algorithms S Mirjalili - Evolutionary algorithms and neural networks, 2019 – Springe Advances in Engineering: An International Journal (ADEIJ), Vol.3, No.418
Reddy Gundla, S. (2025). PostgreSQL tuning for cloud-native Java: Connection pooling vs. reactive drivers. International Journal of Computational and Experimental Science and Engineering, 11(3). https://doi.org/10.22399/ijcesen.3479
Genetic algorithm performance with different selection strategies in solving TSP NM Razali, JGeraghty - Proceedings of the world congress on , 2011 - iaeng.org
Root mean square error (RMSE) or mean absolute error (MAE)?–Arguments against avoiding RMSE in the literature T Chai, RR Draxler - Geoscientific model development, 2014 - gmd.copernicus.org
Advantages of the mean absolute error (MAE) over the root mean square error (RMSE) in assessing average model performance
An efficient optimization approach for designing machine learning models based on genetic algorithm KM Hamdia, X Zhuang, T Rabczuk - Neural Computing and Applications, 2021 - Springer
Gradient descent with random initialization: Fast global convergence for nonconvex phase retrieval Y Chen, Y Chi, J Fan, C Ma - Mathematical Programming, 2019 - Springer
Evolutionary heuristic a* search: Heuristic function optimization via genetic algorithm YF Yiu, J Du,R Mahapatra - 2018 IEEE First International , 2018 - ieeexplore.ieee.org
Lulla, K. L., Chandra, R. C., & Sirigiri, K. S. (2025). Proxy-based thermal and acoustic evaluation of cloud GPUs for AI training workloads. The American Journal of Applied Sciences, 7(7), 111–127. https://doi.org/10.37547/tajas/Volume07Issue07-12
Is local SGD better than minibatch SGD? B Woodworth, KK Patel, S Stich, Z Dai – International , 2020 - proceedings.mlr.press
Improved adam optimizer for deep neural networks Z Zhang - 2018 IEEE/ACM 26th International Symposium on , 2018 - ieeexplore.ieee.org
Convergence of the RMSProp deep learning method with penalty for nonconvex optimization D Xu, S Zhang, H Zhang, DP Mandic - Neural Networks, 2021 - Elsevier
Gradient descent finds global minima of deep neural networks S Du, J Lee, H Li, L Wang - conference on machine , 2019 - proceedings.mlr.press
Extending MLP ANN hyper-parameters Optimization by using Genetic Algorithm F Itano, MAA de
Sousa - 2018 International joint , 2018 - ieeexplore.ieee.org
Backpropagation and stochastic gradient descent method S Amari- Neurocomputing, 1993 - Elsevier
A CNN regression approach for real-time 2D/3D registration S Miao, ZJ Wang, R Liao – IEEE transactions on medical , 2016 - ieeexplore.ieee.org
Artificial intelligence (AI) applied in civil engineering ND Lagaros, V Plevris - Applied Sciences,
- mdpi.com
Bonthu, C., Kumar, A., & Goel, G. (2025). Impact of AI and machine learning on master data management. Journal of Information Systems Engineering and Management, 10(32s), 46–62. https://doi.org/10.55278/jisem.2025.10.32s.46
Samantapudi, R. K. R. (2025). Advantages & impact of fine tuning large language models for ecommerce search. Journal of Information Systems Engineering and Management, 10(45s), 600–622. https://doi.org/10.52783/jisem.v10i45s.8898
Genetic algorithm-A literature review A Lambora, K Gupta, K Chopra - 2019 international conference, 2019 - ieeexplore.ieee.org
Prediction of punching shear capacity for fiber-reinforced concrete slabs using neuro-nomographs constructed by machine learning E Alotaibi, O Mostafa, N Nassif, M Omar- Journal of Structural, 2021 - ascelibrary.org

Most read articles by the same author(s)

<< < 1 2 3 4 5 6 7 > >> 

Similar Articles

1-10 of 37

You may also start an advanced similarity search for this article.