Open Access
Advanced Evolutionary Optimization and Intelligent Sensor Integration for Electromagnetic Compatibility and Signal Integrity in Autonomous Vehicle Architectures
4
Institute for Advanced Automotive Systems, University of Stuttgart, Germany
Abstract
The rapid evolution of autonomous driving technologies and the proliferation of high-voltage power electronics have introduced unprecedented challenges in electromagnetic compatibility (EMC) and signal integrity. This study provides a comprehensive investigation into the integration of Advanced Driver Assistance Systems (ADAS) with evolutionary fuzzy logic and high-speed data acquisition frameworks. By synthesizing nature-inspired modeling techniques, such as genetic fuzzy systems and differential evolution, the research addresses the complexities of vehicle-level EMC design for automotive inverters and high-speed Ethernet communication. The study specifically evaluates the performance of 10G automotive Ethernet through HyperLynx-validated shielding methodologies for camera PCB design in lighting control modules. Furthermore, the paper explores the role of on-board diagnostics and panoramic imaging systems in enhancing situational awareness while mitigating common-mode noise propagation in four-wheel-drive electric vehicles. The methodology combines prospective and retrospective performance assessments with advanced video compression strategies to ensure real-time streaming capabilities without compromising data fidelity. Results indicate that the application of evolutionary fuzzy rule forests and symbolic regression significantly improves the predictive accuracy of vehicle flow and sensor interference detection. The research concludes that a holistic approach, blending intelligent computational paradigms with robust hardware shielding, is essential for the sustainable development of the next generation of interconnected, autonomous, and electromagnetically resilient vehicular platforms.
Keywords
ADAS,
Electromagnetic Compatibility,
Evolutionary Fuzzy Systems,
Automotive Ethernet
References
Funato, H., Li, J. and Takahashi, M. (2015). Vehicle-level analysis technique for EMC design of automotive inverters. Hitachi Review 64, 8, 501-505.
Gao, F., Ye, C. K., Wang, Z. L. and Li, X. (2018). Improvement of low frequency radiated emission in electric vehicle by numerical analysis. J. Control Science and Engineering, 2018, Article ID 5956973.
Gulino, M.S., Fiorentino, A., D. Vangi (2022). Prospective and retrospective performance assessment of advanced driver assistance systems in imminent collision scenarios: the CMI-Vr approach. Eur. Transp. Res. Rev., 14 (1), 10.1186/s12544-022-00527-4.
Huang, T.-Y., Wang, Y.-C., Liao, C.-J., Sang, I.-C. (2017). Panoramic vehicular imaging system. Proc. SPIE-Int. Soc. Opt. Eng., 10209, 10.1117/12.2268569.
Idir, N., Weens, Y., Moreau, M. and Franchaud, J. J. (2009). High-frequency behavior models of ac motors. IEEE Trans. Magnetics 45, 1, 133-138.
Ivan, E., Fernando, A., Mateo, J., Alvaro, P., Javier, P. and Francisco, J. A. (2018). Common mode noise propagation and effects in a four-wheel driven electric vehicle. IEEE Trans. Electromagnetic Compatibility 60, 1, 132-139.
Jahani Moghaddam, M. (2024). A survey on genetic fuzzy systems. Arch. Comput. Methods Eng., 10.1007/s11831-024-10157-9.
Jeong, I. S., Choi, H. W., Choi, H. S. and Chung, D. C. (2018). Analysis of s-parameter using different materials for the WPT resonance coil. IEEE Trans. Applied Superconductivity 28, 3, 1-5.
Jeschke, S., Hirsch, H., Trautmann, M. and Maarleveld, M. (2016). EMI measurement on electric vehicle drive inverters using a passive motor impedance network. Proc. Asia-Pacific Int. Symp. Electromagnetic Compatibility (APEMC), Shenzhen, China.
Jin, X. L., Gu, X. L. and Li, B. (2018). Scattering parameter simulation of microwave window with conformai FDTD method. Proc. IEEE Int. Vacuum Electronics Conf. (IVEC), Monterey, California, USA.
Jose, H., Artur N., Jose, S. and Magno, A. (2016). Proposal for a Brazilian regulation of electromagnetic compatibility applied to automotive vehicles. Proc. IEEE Int. Symp. Electromagnetic Compatibility, Ottawa, Canada.
Kalmeshwar, M., Nandini Prasad, K. (2018). Development of on-board diagnostics for car and itâs integration with android mobile. 2nd International Conference on Computational Systems and Information Technology for Sustainable Solutions, CSITSS 2017, 10.1109/CSITSS.2017.8447540.
KARIM, A. S. A. (2025). Mitigating electromagnetic interference in 10G automotive Ethernet: hyperLynx-validated shielding for camera PCB design in ADAS lighting control. International Journal of Applied Mathematics, 38(2s), 1257-1268.https://doi.org/10.12732/ijam.v38i2s.718.
Kim, D., Hong, K., Jung, B., Kim, J. (2016). A real-time streaming system for a multifunctional vehicle information display based on TMO. Proceedings - 2015 IEEE International Conference on Knowledge and Systems Engineering, KSE 2015, pp. 210-215, 10.1109/KSE.2015.40.
Kolak, I., Lukac, Z., Knezic, M., Koncar, S. (2020). Realization of automotive video data acquisition system for usage in evolution of autonomous vehicles. 2020 Zooming Innovation in Consumer Technologies Conference, ZINC 2020, pp. 160-164, 10.1109/ZINC50678.2020.9161439.
Konecny, J. (2023). MJPEG Video Dataset, 10.17632/3ymvn9dm7x.1.
Kong, D.-W., Lee, S.-H. (2019). Study of wireless communication technology between LED-based vehicles using CSK method. Int. J. Recent. Technol. Eng., 7 (6), pp. 1231-1234.
Koza, J.R. (1990). Genetic Programming: A Paradigm for Genetically Breeding Populations of Computer Programs to Solve Problems: Technical Report STAN-CS-90-1314. Dept. of Computer Science, Stanford University.
Koza, J.R. (1992). Genetic Programming: On the Programming of Computers by Means of Natural Selection. MIT Press, Cambridge, MA, USA.
Krömer, P., Hasal, M., NowakovĂĄ, J., Heckenbergerova, J., MusĂlek, P. (2020). Statistical and nature-inspired modeling of vehicle flows by using finite mixtures of simple circular normal distributions. IEEE Intell. Transp. Syst. Mag., 12 (4), pp. 182-194, 10.1109/MITS.2020.3014419.
Krömer, P., Owais, S.S.J., Platos, J., Snåsel, V. (2013). Towards new directions of data mining by evolutionary fuzzy rules and symbolic regression. Comput. Math. Appl., 66 (2), pp. 190-200, 10.1016/j.camwa.2013.02.017.
Krömer, P., Platoƥ, J. (2017). Simultaneous prediction of wind speed and direction by evolutionary fuzzy rule forest. Procedia Comput. Sci., 108, pp. 295-304, 10.1016/j.procs.2017.05.195.
Kromer, P., Platos, J., Snasel, V., Abraham, A. (2011). Fuzzy classification by evolutionary algorithms. Systems, Man, and Cybernetics (SMC), 2011 IEEE Int. Conf. on, pp. 313-318, 10.1109/ICSMC.2011.6083684.
Li, X., Lin, K.-Y., Meng, M., Li, X., Li, L., Hong, Y., Chen, J. (2022). A survey of ADAS perceptions with development in China. IEEE Trans. Intell. Transp. Syst., 23 (9), pp. 14188-14203, 10.1109/TITS.2022.3149763.
Liu, B.-D., Huang, C.-Y. (1997). Design and implementation of the tree-based fuzzy logic controller. IEEE Trans. Syst. Man Cybern. B, 27 (3), pp. 475-487, 10.1109/3477.584954.
Moral, J., Castiello, C., Magdalena, L., Mencar, C. (2021). Explainable fuzzy systems: Paving the way from interpretable fuzzy systems to explainable AI systems. Studies in Computational Intelligence, Springer International Publishing.
Nafea, A.A., Alameri, S.A., Majeed, R.R., Khalaf, M.A., AL-Ani, M.M. (2024). A short review on supervised machine learning and deep learning techniques in computer vision. Babylon. J. Mach. Learn., 2024, pp. 48-55, 10.58496/BJML/2024/004.
Park, W., Choi, D., Lee, K. (2018). Threat analysis of Wi-Fi connected dashboard camera. 2018 International Conference on Platform Technology and Service, PlatCon 2018, 10.1109/PlatCon.2018.8472768.
Park, K.B., Kim, H.K. (2025). Field testing and detection of camera interference for autonomous driving. Lecture Notes in Computer Science, 15499 LNCS, pp. 191-202, 10.1007/978-981-96-1624-4_15.
Patra, S., Calafate, C.T., Cano, J.-C., Veelaert, P., Philips, W. (2017). Integration of vehicular network and smartphones to provide real-time visual assistance during overtaking. Int. J. Distrib. Sens. Netw., 13 (12), 10.1177/1550147717748114.
Pawlowski, P., Piniarski, K., Dabrowski, A. (2018). Selection and tests of lossless and lossy video codecs for advanced driver-assistance systems. In: Signal Processing - Algorithms, Architectures, Arrangements, and Applications Conference Proceedings, SPA, Vol. 2018-September. pp. 344-349.
PawĆowski, P., Piniarski, K., DÄ
browski, A. (2021). Highly efficient lossless coding for high dynamic range red, clear, clear, clear image sensors. Sensors (Switzerland), 21 (2), pp. 1-17, 10.3390/s21020653.
Peled, D., Shmilovici, A., Hadar, O. (2023). Automative video compression for remote driving via safety considerations. 2023 IEEE Conference on Standards for Communications and Networking, CSCN 2023, pp. 54-58, 10.1109/CSCN60443.2023.10453135.
Prauzek, M., Krömer, P., Rodway, J., Musilek, P. (2016). Differential evolution of fuzzy controller for environmentally-powered wireless sensors. Appl. Soft Comput., 48, pp. 193-206, 10.1016/j.asoc.2016.06.040.
Precup, R.-E., Hellendoorn, H. (2011). A survey on industrial applications of fuzzy control. Comput. Ind., 62 (3), pp. 213-226, 10.1016/j.compind.2010.10.001.
Price, K.V., Storn, R.M., Lampinen, J.A. (2005). Differential evolution a practical approach to global optimization. Natural Computing Series, Springer-Verlag, Berlin, Germany.
van Rijsbergen, C.J. (1979). Information Retrieval (second ed.), Butterworths, London.
Russo, M. (2024). Fuzzy Learning and Applications, International Series on Computational Intelligence, CRC Press.
Salkind, N. (2006). Encyclopedia of Measurement and Statistics, SAGE Publications.
Salman, H.A., Kalakech, A. (2024). Image enhancement using convolution neural networks. Babylon. J. Mach. Learn., 2024, pp. 30-47, 10.58496/BJML/2024/003.
Sammut, C., Webb, G.I. (2011). Encyclopedia of Machine Learning (first ed.), Springer Publishing Company.
Most read articles by the same author(s)
- Dr.Daniel Williams, Dr. Alexei M. Ivanov, OPTIMIZING VEHICLE DESIGN FOR EFFICIENCY: PRESSURE GRADIENT AND AERODYNAMICS EVALUATION USING CFD , International Journal of Next-Generation Engineering and Technology: Vol. 2 No. 03 (2025): Volume 02 Issue 03
- Dr. Alejandro Cortés-Mendoza, Cloud Computing As A Socio-Technical And Environmental Infrastructure: Integrating Security, Sustainability, And Strategic Governance In The Post-Traditional Hosting Era , International Journal of Next-Generation Engineering and Technology: Vol. 2 No. 12 (2025): Volume 02 Issue 12
- Joshua Hoffman, The Algorithmic Frontier of Financial Intermediation: A Comprehensive Analysis of Agentic AI, Large Language Models, And Blockchain Integration in Modern Fintech Ecosystems , International Journal of Next-Generation Engineering and Technology: Vol. 3 No. 02 (2026): Volume 03 Issue 02
- Sneha Reddy, Optimizing Complex Processing Ecosystems using Event-Centric Approaches for Enhanced Durability , International Journal of Next-Generation Engineering and Technology: Vol. 2 No. 04 (2025): Volume 02 Issue 04
- Mateo Laurent Dubois, Adaptive Chaos Engineering and AI-Driven Dependability Modeling for Resilient Cloud-Native and Safety-Critical Systems , International Journal of Next-Generation Engineering and Technology: Vol. 3 No. 01 (2026): Volume 03 Issue 01
- Dr. Youssef El-Masry, Statistical Learning Driven Virtual Counterpart Systems Evaluating Healthcare Coverage Administration Analysis , International Journal of Next-Generation Engineering and Technology: Vol. 2 No. 10 (2025): Volume 02 Issue 10
- Ismoyilov Diyorbek Bektemir ogâli, Fayzillayeva Oykhon Qodir qizi, Esanova Dilsinoy Dilmurod qizi, Artificial Intelligence Today And In The Future , International Journal of Next-Generation Engineering and Technology: Vol. 3 No. 01 (2026): Volume 03 Issue 01
- Dr. Eleanor Whitfield, Architecting Trustworthy and Equitable Artificial Intelligence in Clinical Research and Care: Ethical, Regulatory, and Workforce Imperatives for Responsible Translation , International Journal of Next-Generation Engineering and Technology: Vol. 3 No. 02 (2026): Volume 03 Issue 02
- Raka Pratama, Siti Maharani, Policy-Based Automation for Secure Governance of Machine and Workload Identities in Cloud IAM , International Journal of Next-Generation Engineering and Technology: Vol. 3 No. 09 (2026): Volume 03 Issue 09
- Dr. Alistair J. Sterling, Architectural Frameworks for Multimodal Learning Analytics and Autonomic System Feedback: Integrating Physiological, Inertial, And Temporal Data for Enhanced Skill Acquisition , International Journal of Next-Generation Engineering and Technology: Vol. 2 No. 12 (2025): Volume 02 Issue 12
Similar Articles
- Dr. Theresa Vance, Advanced Paradigms In 10G Automotive Ethernet: Integrating Hyperlynx-Validated Electromagnetic Shielding, Sustainable Printed Electronics, And Adaptive Control for Next-Generation ADAS Architectures , International Journal of Next-Generation Engineering and Technology: Vol. 3 No. 02 (2026): Volume 03 Issue 02
- Dr. Clara E. Whitmore, Artificial Intelligence for Resilient Decentralized Infrastructures: An Integrative Research Study on Hybrid Renewable Energy Management and Real-Time Digital Payment Fraud Detection , International Journal of Next-Generation Engineering and Technology: Vol. 3 No. 04 (2026): Volume 03 Issue 04
- Clara Engelhardt, Resilient and Secure Time-Sensitive Architectures for Safety-Critical Cyber-Physical Systems: Integrating Predictability, Networking Standards, And Fault-Tolerant Design , International Journal of Next-Generation Engineering and Technology: Vol. 3 No. 01 (2026): Volume 03 Issue 01
- Dr. Maria Fernandes, Cyber-Enabled Modeling and Intelligent Decision Support in Human-Centric Industry 5.0 Practices , International Journal of Next-Generation Engineering and Technology: Vol. 3 No. 01 (2026): Volume 03 Issue 01
- Rajesh K. Singh, Arun Mehta, INNOVATIVE TURN INDICATOR SYSTEM: VOICE-ASSISTED TECHNOLOGY FOR SAFER AND SMARTER DRIVING , International Journal of Next-Generation Engineering and Technology: Vol. 2 No. 02 (2025): Volume 02 Issue 02
- Bekzod Karimov, Dilnoza Akhmedova, Robotics, Artificial Intelligence, and Sustainability: A Framework for Next-Generation Construction Management , International Journal of Next-Generation Engineering and Technology: Vol. 3 No. 08 (2026): Volume 03 Issue 08
- Dr. Melissa A. Hooper, Dr. Leonardo Carvalho, BIO-INSPIRED CERAMIC/RESIN COMPOSITES FOR ADVANCED LIQUID COOLING: 3D PRINTED LEAF-VEIN ARCHITECTURES FOR ENHANCED THERMAL MANAGEMENT , International Journal of Next-Generation Engineering and Technology: Vol. 1 No. 01 (2024): Volume 01 Issue 01
- Dr. Muhammad Arif Hidayat, Architectural Design and System-Level Solutions for Seamless Incorporation of Robotic Technologies into Existing Industrial Infrastructure Networks , International Journal of Next-Generation Engineering and Technology: Vol. 3 No. 06 (2026): Volume 03 Issue 06
- Richard P. Hollingsworth, Centering Legacy-to-Cloud Modernization: Architectural Evolution, Cloud-Native Strategies, and Governance Implications in Enterprise Software Systems , International Journal of Next-Generation Engineering and Technology: Vol. 2 No. 11 (2025): Volume 02 Issue 11
- Abhishek Agarwal, Anil Desai, VEHICLE HEALTH INSPECTIONS IN THE DIGITAL AGE: HARNESSING AUTO DIAGNOSTICS FOR PROACTIVE MAINTENANCE , International Journal of Next-Generation Engineering and Technology: Vol. 2 No. 06 (2025): Volume 02 Issue 06
1-10 of 103
Next
You may also start an advanced similarity search for this article.