Open Access
UNDERSTANDING MOISTURE UPTAKE AND DIFFUSIVITY IN PLANT FIBRE-BASED COMPOSITES: CHALLENGES FOR LONG-TERM PERFORMANCE
4
Department of Mechanical Engineering, University of Lagos, Lagos, Nigeria
Abstract
The use of plant fibre-reinforced composites in various industrial applications has gained significant attention due to their sustainability, cost-effectiveness, and environmental benefits. However, one of the critical challenges limiting their widespread use is the susceptibility of these materials to moisture absorption, which can affect their mechanical properties and longevity. This study investigates the moisture absorption rate and diffusivity of plant fibre-reinforced composites, with a particular focus on the influence of different fibre types, matrix materials, and environmental conditions. The moisture absorption tests were conducted according to standard methods, and the rate of absorption and diffusivity were analyzed using Fick’s law of diffusion. The results show that fibre type, matrix material, and environmental humidity significantly affect the moisture uptake behavior of the composites. The study provides insights into the factors influencing the moisture resistance of plant fibre-reinforced composites and offers recommendations for improving their performance in moisture-prone environments.
Keywords
Plant fibre,
moisture absorption,
diffusivity,
composite materials
References
Alagirusamy, R., & P. S. Mishra. (2018). Natural Fibre Reinforced Composites: Processing, Properties, and Applications. Wiley.
Lee, S. K., & H. Y. Yoon. (2019). "Moisture Absorption Behavior of Natural Fibre Composites." Journal of Composites Science, 3(2), 45-58.
Fick, A. (1855). "On Liquid Diffusion." Annalen der Physik, 170(1), 59-84.
Raghavan, A., & K. S. Thakur. (2020). "Moisture Absorption and Mechanical Properties of Natural Fibre-Reinforced Composites." Materials Science and Engineering, 15(4), 1247-1255.
Yang, Z., & Z. L. Liu. (2017). "Effect of Environmental Factors on the Moisture Absorption of Natural Fibre Composites." Composite Materials, 51(10), 1399-1413.
Most read articles by the same author(s)
- Dr. Nimal Perera, Ms. Ishani Fernando, An AI-Enabled Framework for Polycrisis Risk Mitigation in Residential High-Rise Buildings: A Systematic and Critical Literature Synthesis of Urban Resilience Strategies , International Journal of Next-Generation Engineering and Technology: Vol. 3 No. 08 (2026): Volume 03 Issue 08
- Kwame Mensah, Ama Owusu, Event-Driven Intelligent Manufacturing: Autonomous Exception Resolution Using Multi-Agent Generative AI and SAP S/4HANA , International Journal of Next-Generation Engineering and Technology: Vol. 3 No. 09 (2026): Volume 03 Issue 09
- Dr. Elena Marovic, Human Exposure to Microplastics: Pathways, Internal Distribution, Analytical Detection, and Emerging Toxicological Implications , International Journal of Next-Generation Engineering and Technology: Vol. 2 No. 09 (2025): Volume 02 Issue 09
- Dr. Lucas J. Reinhardt, Dr. Hannah C. Doyle, Dr. Noor A. Rahman, Internet of Things–Enabled Intelligent Marketing Ecosystems: An Integrative Research Study on Digital Transformation, Artificial Intelligence, Customer Experience, and Cybersecurity , International Journal of Next-Generation Engineering and Technology: Vol. 3 No. 04 (2026): Volume 03 Issue 04
- Dr. Theresa Vance, Advanced Paradigms In 10G Automotive Ethernet: Integrating Hyperlynx-Validated Electromagnetic Shielding, Sustainable Printed Electronics, And Adaptive Control for Next-Generation ADAS Architectures , International Journal of Next-Generation Engineering and Technology: Vol. 3 No. 02 (2026): Volume 03 Issue 02
- Clara Engelhardt, Resilient and Secure Time-Sensitive Architectures for Safety-Critical Cyber-Physical Systems: Integrating Predictability, Networking Standards, And Fault-Tolerant Design , International Journal of Next-Generation Engineering and Technology: Vol. 3 No. 01 (2026): Volume 03 Issue 01
- Dr. Alejandro M. Cortés, Climate Vulnerability, Environmental Change, and Adaptive Pathways: Integrating Biodiversity, Agriculture, Water, Energy, Urban Systems, and Human Mobility in a Warming World , International Journal of Next-Generation Engineering and Technology: Vol. 3 No. 01 (2026): Volume 03 Issue 01
- Dr. Olufemi A. Adedayo, UNDERSTANDING MOISTURE UPTAKE AND DIFFUSIVITY IN PLANT FIBRE-BASED COMPOSITES: CHALLENGES FOR LONG-TERM PERFORMANCE , International Journal of Next-Generation Engineering and Technology: Vol. 2 No. 06 (2025): Volume 02 Issue 06
- Rizky Pratama, Dewi Lestari, Performance Analysis Framework for Dynamic AODV Protocols in MANETs , International Journal of Next-Generation Engineering and Technology: Vol. 3 No. 09 (2026): Volume 03 Issue 09
- Dr. Anika Vogel, Prof. Dmitri Volkov, PLASMA THERMAL DYNAMICS IN THE MAGNETIC FIELD OSCILLATING AMPLIFIED (MOA) THRUSTER: AN EXAMINATION OF ADIABATIC HEATING PROCESSES , International Journal of Next-Generation Engineering and Technology: Vol. 1 No. 01 (2024): Volume 01 Issue 01
Similar Articles
- Dr. Melissa A. Hooper, Dr. Leonardo Carvalho, BIO-INSPIRED CERAMIC/RESIN COMPOSITES FOR ADVANCED LIQUID COOLING: 3D PRINTED LEAF-VEIN ARCHITECTURES FOR ENHANCED THERMAL MANAGEMENT , International Journal of Next-Generation Engineering and Technology: Vol. 1 No. 01 (2024): Volume 01 Issue 01
- Prof. Kavita Menon, An In-Depth Review of Recent Advances in Cables and Towed Objects for Ocean Engineering Towing Systems , International Journal of Next-Generation Engineering and Technology: Vol. 2 No. 08 (2025): Volume 02 Issue 08
- Dr. Rico Fernandez, HARNESSING SOLAR ENERGY FOR COOLING: INNOVATIONS IN SOLAR THERMAL COOLING SYSTEMS , International Journal of Next-Generation Engineering and Technology: Vol. 2 No. 01 (2025): Volume 02 Issue 01
- Dr. Natalie R. Cheng, Prof. Kenjiro Takamura, ADVANCED GRAPHENE SYNTHESIS FROM SOLID POLYCYCLIC AROMATIC HYDROCARBONS VIA A CONTROLLED-ENVIRONMENT CRUCIBLE TECHNIQUE , International Journal of Next-Generation Engineering and Technology: Vol. 1 No. 01 (2024): Volume 01 Issue 01
- Dr. Elena Marovic, Human Exposure to Microplastics: Pathways, Internal Distribution, Analytical Detection, and Emerging Toxicological Implications , International Journal of Next-Generation Engineering and Technology: Vol. 2 No. 09 (2025): Volume 02 Issue 09
- Dr. Theresa Vance, Advanced Paradigms In 10G Automotive Ethernet: Integrating Hyperlynx-Validated Electromagnetic Shielding, Sustainable Printed Electronics, And Adaptive Control for Next-Generation ADAS Architectures , International Journal of Next-Generation Engineering and Technology: Vol. 3 No. 02 (2026): Volume 03 Issue 02
You may also start an advanced similarity search for this article.