Open Access
HYDRAULIC FRACTURING IN OIL AND GAS WELLS: TECHNIQUES, INNOVATION, AND ENVIRONMENTAL IMPACTS
4
Department of Energy, University of Sao Paulo, Brazil
Abstract
Hydraulic fracturing (fracking) is a widely adopted technique for enhancing the production of oil and gas from unconventional reservoirs. Well stimulation using hydraulic fracturing improves the flow of hydrocarbons from reservoir rock to the wellbore. This article provides a detailed exploration of the fundamental principles, technological advancements, challenges, and environmental concerns associated with hydraulic fracturing. By reviewing recent literature and industry practices, we discuss the key components of well stimulation, the types of fluids and proppants used, and the processes involved in hydraulic fracturing. Furthermore, we examine the operational and environmental considerations that must be addressed to optimize hydraulic fracturing while minimizing negative ecological impacts. This article concludes by highlighting future trends and innovations in well stimulation technology.
Keywords
Hydraulic Fracturing,
Well Stimulation,
Proppants,
Reservoir Engineering
References
Agarwal, M., & Kudapa, V. K. (2022a). Comparing the performance of supercritical CO2 fracking with high energy gas fracking in unconventional shale. MRS Energy & Sustainability, 1-8.
Agarwal, M., & Kudapa, V. K. (2022b). Plasma-based fracking in unconventional shale – A review. Materials Today: Proceedings.
Agarwal, M., & Kudapa, V. K. (2022c). Foam-based fracking in unconventional shale reservoir. Materials Today: Proceedings.
Ben-Naceur, K., & Economides, M. J. (1988, November). The effectiveness of acid fractures and their production behavior. In SPE Eastern Regional Meeting. OnePetro.
Cipolla, C. L., Lolon, E., Erdle, J., & Tathed, V. S. (2009, October). Modeling well performance in shale-gas reservoirs. In SPE/EAGE Reservoir Characterization and Simulation Conference. OnePetro.
Clark, J. B. (1949). A hydraulic process for increasing the productivity of wells. Journal of Petroleum Technology, 1(1), 1-8.
Cook, C. C., & Brekke, K. (2002, February). Productivity preservation via hydraulic propped fractures in the Eldfisk North Sea chalk field. In International Symposium and Exhibition on Formation Damage Control. OnePetro.
Daneshy, A. (2010). Hydraulic fracturing to improve production. The Way Ahead, 6(3), 14-17.
Dora, T. K., Iqbal, M. I., Krishna, K. V., Mahapatra, S. R., Alnuumani, M. A., & Al Rajawy, I. (2022). Application of low-temperature fracturing fluid system in oil reservoir–A breakthrough approach. Materials Today: Proceedings, 68, 780-784.
Fredd, C. N., McConnell, S. B., Boney, C. L., & England, K. W. (2000, March). Experimental study of hydraulic fracture conductivity demonstrates the benefits of using proppants. In SPE Rocky Mountain Regional/Low-Permeability Reservoirs Symposium and Exhibition. OnePetro.
Kudapa, V. K., Kumar, S., Gupta, D. K., Sharma, P., & KunhAbdulla, R. (2017b, May). Modelling of gas production from shale matrix to fracture network. In SPE Intelligent Oil and Gas Symposium. OnePetro.
Kudapa, V. K., Sharma, P., Kunal, V., & Gupta, D. K. (2017a). Modeling and simulation of gas flow behavior in shale reservoirs. Journal of Petroleum Exploration and Production Technology, 7(4), 1095-1112.
Li, Y., Wang, Y., Cheng, X., Che, M., Zhang, F., & Peng, J. (2009, January). Propped fracturing in high temperature deep carbonate formation. In SPE Hydraulic Fracturing Technology Conference. OnePetro.
Mayrhofer, K. J. J., Strmcnik, D., Blizanac, B. B., Stamenkovic, V., Arenz, M., & Markovic, N. M. (2008). Measurement of oxygen reduction activities via the rotating disc electrode method: From Pt model surfaces to carbon-supported high surface area catalysts. Electrochimica Acta, 53(7), 3181-3188.
Mayrhofer, S., Van Hoek, A. H., Mair, C., Huys, G., Aarts, H. J., Kneifel, W., & Domig, K. J. (2010). Antibiotic susceptibility of members of the Lactobacillus acidophilus group using broth microdilution and molecular identification of their resistance determinants. International Journal of Food Microbiology, 144(1), 81-87.
Nagel, N., Gil, I., Sanchez-Nagel, M., & Damjanac, B. (2011, January). Simulating hydraulic fracturing in real fractured rocks—overcoming the limits of pseudo3D models. In SPE Hydraulic Fracturing Technology Conference. OnePetro.
Navarre, S. E. (1998). Salvador Minuchin's structural family therapy and its application to multicultural family systems. Issues in Mental Health Nursing, 19(6), 557-570.
Roberts, L. D., & Guin, J. A. (1975). A new method for predicting acid penetration distance. Society of Petroleum Engineers Journal, 15(4), 277-286.
Rückheim, J., Voigtlaender, G., & Stein-Khokhlov, M. (2005, June). The technical and economic challenge of mature gas fields: The giant Altmark field, a German example. In SPE Europec/EAGE Annual Conference. OnePetro.
Soliman, M. S. M., Abdel-Rahman, E. M., El-Saadany, E. F., & Mansour, R. R. (2008). A wideband vibration-based energy harvester. Journal of Micromechanics and Microengineering, 18(11), 115021.
Veatch, R. W., & Moschovidis, Z. A. (1986, March). An overview of recent advances in hydraulic fracturing technology. In International Meeting on Petroleum Engineering. OnePetro.
Vega, G., Negron-Perez, E., & Abass, H. (1997, August). Hydraulic fracturing hot, high pressure oil and gas wells in tectonically active fields in Eastern Venezuela. In Latin American and Caribbean Petroleum Engineering Conference. OnePetro.
Wang, Y., Zhang, F., Cheng, X., Peng, J., Li, Y., & Li, S. (2006, May). A case study: Re-fracturing of high temperature deep well in carbonate reservoir. In SPE Technical Symposium of Saudi Arabia Section. OnePetro.
Warpinski, N. R., Mayerhofer, M. J., Vincent, M. C., Cipolla, C. L., & Lolon, E. P. (2009). Stimulating unconventional reservoirs: maximizing network growth while optimizing fracture conductivity. Journal of Canadian Petroleum Technology, 48(10), 39-51.
Wedman, M. L., Lynch, K. W., & Spearman, J. W. (1999, May). Hydraulic fracturing for sand control in unconsolidated heavy-oil reservoirs. In SPE Western Regional Meeting. OnePetro.
Zoveidavianpoor, M., Samsuri, A., & Shadizadeh, S. R. (2011, March). The needs for hydraulic fracturing in Iranian carbonate oilfields: Acid or propped fracture? In 1st National Conference of Novel Technologies in Oil & Gas Industries, IAU, Iran (pp. 3-4).
Most read articles by the same author(s)
- Dr. Nimal Perera, Ms. Ishani Fernando, An AI-Enabled Framework for Polycrisis Risk Mitigation in Residential High-Rise Buildings: A Systematic and Critical Literature Synthesis of Urban Resilience Strategies , International Journal of Next-Generation Engineering and Technology: Vol. 3 No. 08 (2026): Volume 03 Issue 08
- Dr. Natalie R. Cheng, Prof. Kenjiro Takamura, ADVANCED GRAPHENE SYNTHESIS FROM SOLID POLYCYCLIC AROMATIC HYDROCARBONS VIA A CONTROLLED-ENVIRONMENT CRUCIBLE TECHNIQUE , International Journal of Next-Generation Engineering and Technology: Vol. 1 No. 01 (2024): Volume 01 Issue 01
- Dr. Mateo Alvarez, INTEGRATED ENVIRONMENTAL IMPACT AND PREDICTIVE ANALYTICS FRAMEWORK FOR OFFSHORE DRILLING DISCHARGES AND BENTHIC ECOSYSTEM INTEGRITY , International Journal of Next-Generation Engineering and Technology: Vol. 3 No. 02 (2026): Volume 03 Issue 02
- Kwame Mensah, Ama Owusu, Event-Driven Intelligent Manufacturing: Autonomous Exception Resolution Using Multi-Agent Generative AI and SAP S/4HANA , International Journal of Next-Generation Engineering and Technology: Vol. 3 No. 09 (2026): Volume 03 Issue 09
- Dr. Elena Marovic, Human Exposure to Microplastics: Pathways, Internal Distribution, Analytical Detection, and Emerging Toxicological Implications , International Journal of Next-Generation Engineering and Technology: Vol. 2 No. 09 (2025): Volume 02 Issue 09
- Dr. Dilshan Fernando, An Intelligent Framework For Enhancing Reliability And Security In Distributed Multi-Cloud Computing Environments , International Journal of Next-Generation Engineering and Technology: Vol. 3 No. 05 (2026): Volume 03 Issue 05
- Clara Engelhardt, Resilient and Secure Time-Sensitive Architectures for Safety-Critical Cyber-Physical Systems: Integrating Predictability, Networking Standards, And Fault-Tolerant Design , International Journal of Next-Generation Engineering and Technology: Vol. 3 No. 01 (2026): Volume 03 Issue 01
- Rizky Pratama, Dewi Lestari, Performance Analysis Framework for Dynamic AODV Protocols in MANETs , International Journal of Next-Generation Engineering and Technology: Vol. 3 No. 09 (2026): Volume 03 Issue 09
- Dr. Olufemi A. Adedayo, UNDERSTANDING MOISTURE UPTAKE AND DIFFUSIVITY IN PLANT FIBRE-BASED COMPOSITES: CHALLENGES FOR LONG-TERM PERFORMANCE , International Journal of Next-Generation Engineering and Technology: Vol. 2 No. 06 (2025): Volume 02 Issue 06
- Dr. Arjun Mehta, Cognitive Automation Architectures Advancing Pharmacy Benefit Service Governance Outcomes , International Journal of Next-Generation Engineering and Technology: Vol. 2 No. 12 (2025): Volume 02 Issue 12
Similar Articles
- Dr. Rebecca Lopez, THE ROLE OF STRESS AND STRAIN IN MODULATING GAS PRODUCTION FROM SHALE , International Journal of Next-Generation Engineering and Technology: Vol. 2 No. 06 (2025): Volume 02 Issue 06
- Wei Zhang, Liang Chen, Advanced Process Optimization Framework for Enhancing Biogranule Development Using Static Mixers in Aerobic Textile Wastewater Treatment Systems , International Journal of Next-Generation Engineering and Technology: Vol. 3 No. 05 (2026): Volume 03 Issue 05
- Mateo Laurent Dubois, Adaptive Chaos Engineering and AI-Driven Dependability Modeling for Resilient Cloud-Native and Safety-Critical Systems , International Journal of Next-Generation Engineering and Technology: Vol. 3 No. 01 (2026): Volume 03 Issue 01
- Dr. Ahmad Fauzan Nugroho, Intelligent CAD-Based Framework for Automating Design Optimization and Rapid Prototyping in Engineering Systems , International Journal of Next-Generation Engineering and Technology: Vol. 3 No. 06 (2026): Volume 03 Issue 06
- Prof. Kavita Menon, An In-Depth Review of Recent Advances in Cables and Towed Objects for Ocean Engineering Towing Systems , International Journal of Next-Generation Engineering and Technology: Vol. 2 No. 08 (2025): Volume 02 Issue 08
- Veherinskyi Taras Ihorovych, Optimization of Hydraulic System Operation in Agricultural Machinery for The Purpose of Reducing Energy Consumption , International Journal of Next-Generation Engineering and Technology: Vol. 1 No. 01 (2024): Volume 01 Issue 01
- Elena M. Hartwell, Prof. Daniel K. Mercer, Dr. Sofia M. Alvarez, Adaptive and Secure Dynamic Voltage Restoration in Smart Power Networks: A Text-Based Integrative Research Study on PI-Controlled DVRs, Converter Coordination, Energy Management, and Cyber-Physical Resilience , International Journal of Next-Generation Engineering and Technology: Vol. 3 No. 04 (2026): Volume 03 Issue 04
- Samnardo Martins, AI-Augmented Paradigms In Enterprise Software Refactoring And Development: A Comprehensive Analysis Of Contemporary Approaches And Theoretical Implications , International Journal of Next-Generation Engineering and Technology: Vol. 1 No. 01 (2024): Volume 01 Issue 01
- Dr. Arjun Mehta, Dr. Priya Nair, An Integrated Architecture for Enhancing Data Security in Cross-Platform Mobile Apps Using React Native , International Journal of Next-Generation Engineering and Technology: Vol. 3 No. 05 (2026): Volume 03 Issue 05
- Andras Varga, A Socio-Technical Framework for Error Budget–Driven Reliability Governance in Cloud-Native and Edge-Integrated Distributed Systems , International Journal of Next-Generation Engineering and Technology: Vol. 3 No. 01 (2026): Volume 03 Issue 01
1-10 of 61
Next
You may also start an advanced similarity search for this article.