eISSN: 3087-4068 editor@aimjournals.com
All Journals
Submit your article

International Research Journal of Advanced Engineering and Technology

Open Access Peer Review International
Open Access

Test Results of a Two-Tier Plough for Plowing Cotton Soils

DOI https://doi.org/10.55640/irjaet-v03i03-02
PDF
Temirov Isroil Gulomovich 1 , Rashidov Nurbek son of Shermamat 1 ,
4 Candidate of Technical Sciences, Professor. Karshi State Technical University. Carshi. Republic of Uzbekistan
4 Candidate of Technical Sciences, Associate Professor. Karshi State Technical University. Carshi. Republic of Uzbekistan

Abstract

The article provides an analysis of the process of basic tillage from cotton with serial plows, it is concluded that the two-tier plows currently used do not take into account those factors that are caused by the technology of cotton cultivation, and cannot fully ensure the required quality of processing. The results of comparative experimental studies of a serial and developed two-tier plow for plowing cotton soils are presented.

Keywords

Plowing the soil, cotton fields, ridges

References

Matrasulov R. On the influence of the relief of the cotton field on the dynamics and agrotechnical indicators of the arable aggregate. // Ref. scientific and technical collection "Mechanization of cotton production". Tashkent, 1980, No. 5.
Mamatov F.M., Temirov I.G. Investigation of the influence of the relief of a cotton field on the operation of a two-tier plow. - Collection of materials of the Republican scientific and practical conference. Samarkand, 2008
Temirov I.G. On the basic parameters of a two-tier plow for plowing cotton soils. ACADEMY Magazine, No. 3 (42), March 2019
Mamatov F., Aldoshin N., Mirzaev B., Ravshanov H., Qurbonov Sh. and Rashidov N. Development of a frontal plow for smooth, furless plowing with cutoffs// IOP Conf. Series: Materials Science and Engineering 1030 (2021) 012135. – United Kingdom, 2021. doi:10.1088/1757-899X/1030/1/012135.
Mamatov F., Umurzakov U., Mirzaev B., Rashidov N., Eshchanova G and Avazov I. Physical-mechanical and technological properties of eroded soils // E3S Web of Conferences 264, 04065 (2021). – France, 2020. doi.org/10.1051/e3sconf/202126404065.
Khudayarov B., Mardonov Sh., Rashidov N., Sodikov X and Baratov D. Ripper for processing slope field // E3S Web of Conferences 264, 04034 (2021). – France, 2021. doi.org/10.1051/e3sconf/202126404034.
Ravshanov, K., Fayzullaev, K., Ismoilov, I., Irgashev, D., Mamatov, S., & Mardonov, S. (2020, July). The machine for the preparation of the soil in sowing of plow crops under film. In IOP Conference Series: Materials Science and Engineering (Vol. 883, No. 1, p. 012138). IOP Publishing.
Fayzullaev K. et al. Study on mechanisms of tillage for melon cultivation under the film //E3S Web of Conferences. – EDP Sciences, 2021. – Π’. 304. – Π‘. 03012.
Fayzullayev K. et al. Raking plates of the combination machine's subsoiler //E3S Web of Conferences. – EDP Sciences, 2021. – Π’. 264. – Π‘. 04039.
Irgashev D. et al. Placement of working bodies on the frame of the tool plow-ripper //E3S Web of Conferences. – EDP Sciences, 2023. – Π’. 390. – Π‘. 01036.
Irgashev D., Mamadiyorov O., Xidirov M. Technical analysis of the disk working bodies that work the soil and them working between the garden row //Science and innovation. – 2022. – Π’. 1. – β„–. A5. – Π‘. 150-155.
Irgashev D. B. Basing the Constructional Parameters of the Plug-Softener that Works Between the Garden Rows. – 2024.
Mamatov F. et al. Justification of the bottom softening parameters of working organ with a sloping column //E3S Web of Conferences. – EDP Sciences, 2023. – Π’. 434. – Π‘. 03010.
Mamatov F. et al. Justification of the bottom softening parameters of working organ with a sloping column //E3S Web of Conferences. – EDP Sciences, 2023. – Π’. 434. – Π‘. 03010.
Irgashev Dilmurod Begmurodovich I. D. B. Theoretical Basis of Leveling Tillage in A Paraplow-Type Slanted-Column Chisel Plow //Theoretical Basis of Leveling Tillage in A Paraplow-Type Slanted-Column Chisel Plow. – 2025. – Π’. 7. – β„–. 3. – Π‘. 168-175.