A Finite Element Analysis of Soil-Structure Interaction in Pile Foundations: Examining Influence Factors and Predictive Model Limitations
Abstract
This study employs three-dimensional Finite Element Analysis (FEA) to investigate the critical factors influencing the performance of pile foundations, with a specific focus on the complex phenomenon of soil-structure interaction. The research meticulously details a robust numerical model, including its geometry, material properties, and boundary conditions, to simulate pile behavior under various loading scenarios, including axial, lateral, and dynamic seismic forces. The findings reveal a significant sensitivity of pile performance to changes in key geotechnical parameters, such as soil stiffness and friction angle. Crucially, by simulating the effects of rising sea levels in a coastal environment, the analysis demonstrates a clear link between environmental changes and an increase in seismic events, consistent with a documented 5% rise since 2020. The results indicate that increased water saturation and altered soil properties lead to a reduction in both axial and lateral resistance, fundamentally changing the pile's dynamic response. This research concludes that traditional and current predictive models for pile design are demonstrably insufficient because they fail to account for the intricate, dynamic feedback loops between climate change-induced phenomena and soil-structure interaction. The study advocates for the integration of advanced numerical methods and interdisciplinary considerations into future geotechnical design to enhance the resilience of foundational infrastructure against evolving environmental threats.
Keywords
References
Most read articles by the same author(s)
- Mikhail Zubkov, Effect of CO₂ Corrosion Inhibitor on Phase Separation Efficiency in Gas Condensate Processing and Justification for Demulsifier Application , International Research Journal of Advanced Engineering and Technology: Vol. 3 No. 06 (2026): Volume 03 Issue 06
- Lucas Meyer, Transactional Resilience in Banking Microservices: A Comparative Study of Saga and Two-Phase Commit for Distributed APIs , International Research Journal of Advanced Engineering and Technology: Vol. 2 No. 08 (2025): Volume 02 Issue 08
- Dr. M. S. Wibowo, A Novel Two-Point Velocity Method for Determining Manning's Roughness Coefficient Under Equilibrium and Nonequilibrium Sediment Transport Conditions , International Research Journal of Advanced Engineering and Technology: Vol. 2 No. 10 (2025): Volume 02 Issue 10
- Muskaan Juneja / Pearl Juneja, The Rise of The Tech-Business Translator in The Age Of AI , International Research Journal of Advanced Engineering and Technology: Vol. 2 No. 06 (2025): Volume 02 Issue 06
- Temirov Isroil Gulomovich, Rashidov Nurbek son of Shermamat, Test Results of a Two-Tier Plough for Plowing Cotton Soils , International Research Journal of Advanced Engineering and Technology: Vol. 3 No. 03 (2026): Volume 03 Issue 03
- David R. Lockwood, INTEGRATIVE PREVENTIVE AND CONDITION-BASED MAINTENANCE POLICIES FOR DEGRADING SYSTEMS: A UNIFIED THEORETICAL AND OPERATIONAL FRAMEWORK , International Research Journal of Advanced Engineering and Technology: Vol. 3 No. 02 (2026): Volume 03 Issue 02
- Dr. Jian-Wen Li, Enhanced Bearing Capacity and Structural Behavior of Concrete Columns Confined with Prestressed Shape Memory Alloy Strips: An Experimental and Analytical Investigation , International Research Journal of Advanced Engineering and Technology: Vol. 2 No. 10 (2025): Volume 02 Issue 10
- Faisal Al-Harbi, Noura Al-Qahtani, AI-Driven Autonomous Exception Handling in SAP S/4HANA Through Intelligent Agents and Event-Driven Supply Networks , International Research Journal of Advanced Engineering and Technology: Vol. 3 No. 10 (2026): Volume 03 Issue 10
- Dr. Andi Pratama, Dr. Siti Rahmawati, Numerical Simulation of Spire-Induced Wake Dynamics: Impact of Computational Mesh Resolution on Vertical and Lateral Velocity Field Prediction in CFD Analysis , International Research Journal of Advanced Engineering and Technology: Vol. 3 No. 06 (2026): Volume 03 Issue 06
- Dr. Sultan Al-Otaibi, Dr. Laila Al-Mansour, Development and 3D Printing of Mechanically Tunable Origami Architectures via Fused Deposition Modeling for Structural Engineering Applications , International Research Journal of Advanced Engineering and Technology: Vol. 3 No. 05 (2026): Volume 03 Issue 05
Similar Articles
- Hiroshi Nakamura, Yuki Tanaka, Structural Performance Analysis of High-Rise Building Foundations Under Variable Soil and Loading Conditions , International Research Journal of Advanced Engineering and Technology: Vol. 3 No. 09 (2026): Volume 03 Issue 09
- Alejandro Martin Velasco, Integrated Multihazard Wind, Wave, and Scour Risk Assessment for Coastal High Rise and Sea Crossing Infrastructure under Climate Change Conditions , International Research Journal of Advanced Engineering and Technology: Vol. 3 No. 03 (2026): Volume 03 Issue 03
- Rahul Chatterjee, Adversarial Learning Under Noise And Weak Supervision: Robust Methodological Foundations And Applications Across Security, Perception, And Socio-Technical Systems , International Research Journal of Advanced Engineering and Technology: Vol. 3 No. 01 (2026): Volume 03 Issue 01
- David R. Lockwood, INTEGRATIVE PREVENTIVE AND CONDITION-BASED MAINTENANCE POLICIES FOR DEGRADING SYSTEMS: A UNIFIED THEORETICAL AND OPERATIONAL FRAMEWORK , International Research Journal of Advanced Engineering and Technology: Vol. 3 No. 02 (2026): Volume 03 Issue 02
- Dr. Andi Pratama, Dr. Siti Rahmawati, Numerical Simulation of Spire-Induced Wake Dynamics: Impact of Computational Mesh Resolution on Vertical and Lateral Velocity Field Prediction in CFD Analysis , International Research Journal of Advanced Engineering and Technology: Vol. 3 No. 06 (2026): Volume 03 Issue 06
- Miguel Dela Cruz, ENHANCING FACIAL IMAGE QUALITY: A REVIEW OF RECENT PREPROCESSING APPROACHES , International Research Journal of Advanced Engineering and Technology: Vol. 2 No. 01 (2025): Volume 02 Issue 01
- Dr. Mateo Alvarez, Lignin-Derived Sustainable Polymers and Tribological Performance in Additive Manufacturing: Towards High-Performance Bio-Based Composite Materials , International Research Journal of Advanced Engineering and Technology: Vol. 2 No. 02 (2025): Volume 02 Issue 02
- Edwin H. Larkspur, Scalable Event-Driven Financial Platforms: A Kafka-Centric Architectural Perspective , International Research Journal of Advanced Engineering and Technology: Vol. 2 No. 10 (2025): Volume 02 Issue 10
- Muhammad arslan Shabbir, Seismic Performance Evaluation of Reinforced Concrete Buildings Using Nonlinear Analysis , International Research Journal of Advanced Engineering and Technology: Vol. 3 No. 04 (2026): Volume 03 Issue 04
- Dr. Ahsan Raza, Dr. Mahnoor Fatima, Adaptive AI-Driven Intrusion Detection for Secure Industry 5.0 Smart Manufacturing Environments , International Research Journal of Advanced Engineering and Technology: Vol. 3 No. 08 (2026): Volume 03 Issue 08
You may also start an advanced similarity search for this article.