eISSN: 3087-4319 editor@aimjournals.com
All Journals
Submit your article

International Journal of Next-Generation Engineering and Technology

Open Access Peer Review International
Open Access

Lean Production Optimization Through SAP PP and SAP Digital Manufacturing Integration

DOI https://doi.org/10.55640/ijnget-v03i08-10
PDF
Rohan Malhotra 1 , Kavya Iyer 1 ,
4 Institute of Lean Manufacturing Studies, India
4 Center for Smart Production and Industrial Engineering, India

Abstract

The integration of production planning with digitally enabled manufacturing execution represents an important pathway for improving production responsiveness, process visibility, and operational coordination. This research examines a conceptual framework for Lean Production Optimization Through SAP PP and SAP Digital Manufacturing Integration, with particular emphasis on the relationship between production planning, shop-floor information, process conditions, and adaptive operational decision-making. Because the supplied literature is concentrated primarily on machining behavior, serrated-chip formation, cutting-force modeling, thermal-mechanical effects, and numerical prediction, the study positions these manufacturing-process findings as the technical foundation for understanding why production-planning systems require reliable, timely, and process-sensitive information. The methodology develops an integrated conceptual architecture connecting SAP Production Planning (SAP PP), SAP Digital Manufacturing, production orders, machine/process information, quality observations, and feedback-based planning decisions. The proposed framework is evaluated through analytical reasoning and hypothetical manufacturing scenarios rather than through a proprietary industrial dataset. The findings indicate that integration can theoretically reduce information latency between planning and execution, improve synchronization of production decisions with shop-floor conditions, and create a stronger basis for exception-oriented planning. The research also identifies an important limitation: the supplied references do not directly investigate SAP PP, SAP Digital Manufacturing, or lean enterprise systems. Consequently, the proposed SAP integration model is a research synthesis and conceptual framework rather than an empirically validated SAP implementation study. The paper contributes by translating process-level manufacturing intelligence into an integrated production-planning perspective and by identifying the information requirements necessary for lean-oriented digital manufacturing.

Keywords

SAP PP, SAP Digital Manufacturing, Lean Production, Production Planning

References

G. Bicheng et al., Research on the analytical modeling of critical conditions of serrated Chip formation based on thermal-mechanical coupled material behavior, J. Manuf. Process. 68(PA) (2021) 71–84.
X. Chen, J. Tang, H. Ding and A. Liu , A new geometric model of serrated chip formation in high-speed machining, J. Manuf. Process. 62 (2021) 632–645.
M. Harzallah, T. Pottier, R. Gilblas, Y. Landon, M. Mousseigne and J. Senatore , A coupled in-situ measurement of temperature and kinematic fields in Ti-6Al-4V serrated chip formation at micro-scale, Int. J. Mach. Tools Manuf. 130 (2018) 20–35.
M. Issa, K. Saanouni, C. Labergere and A. Rassineux , Prediction of serrated chip formation in orthogonal metal cutting by advanced adaptive 2D numerical methodology, Int. J. Mach. Mach. Mater. 9(3/4) (2011) 295–315.
R. Komanduri and Z.-B. Hou , On thermoplastic shear instability in the machining of a titanium alloy (Ti-6Al-4V), Metall. Mater. Trans. A 33(9) (2002) 2995–3010.
P. J. Arrazola, O. Barbero and I. Urresti , Influence of material parameters on serrated chip prediction in finite element modeling of chip formation, Process Int. J. Mater. Form. 3(1) (2010) 519–522.
P. J. Arrazola, A. Villar, D. Ugarte and S. Marya , Serrated chip prediction in finite element modeling of the chip formation process, Mach. Sci. Technol. 11(3) (2007) 367–390.
S.-H. Rhim and S.-I. Oh , Prediction of serrated chip formation in metal cutting process with new flow stress model for AISI 1045 steel, J. Mater. Process. Technol. 171(3) (2006) 417–422.
Z. Shun, J. Feng, W. Xue and N. Ying , Modeling of cutting forces in helical milling of unidirectional CFRP considering carbon fiber fracture, J. Manuf. Process. 68(PA) (2021) 1495–1508.
T. Özel and D. Ulutan , Effects of machining parameters and tool geometry on serrated chip formation, specific forces and energies in orthogonal cutting of nickel-based super alloy Inconel 100 manufacture, Proc. Inst. Mech. Eng. B: J. Eng. 228(7) (2014) 673–686.
L. Wen, C. Q. Yang, Q. L. Niu, W. W. Ming and M. Chen , Experimental study on the formation mechanism of serrated chip of TC11 titanium alloy, Key Eng. Mater. 4283(693–693) (2016) 693–693.
M. Kalal, "Integrating SAP PP and SAP Digital Manufacturing for Lean Production Optimization," 2026 International Symposium of Systems, Advanced Technologies and Knowledge (ISSATK), Hammamet, Tunisia, 2026, pp. 1-7, doi: 10.1109/ISSATK69667.2026.11566800.

Most read articles by the same author(s)

1 2 3 4 5 6 7 8 9 10 > >> 

Similar Articles

31-40 of 71

You may also start an advanced similarity search for this article.