Open Access

TECHNOLOGICAL INNOVATIONS AND CHALLENGES IN ULTRASONIC DISTANCE MEASUREMENT SYSTEMS

https://doi.org/10.55640/ijnget-v02i05-01

pdf

Prof. Amir A. Faruqi ¹ ,

⁴ School of Engineering, University of Tehran, Iran

Abstract

Distance measurement is a fundamental requirement in various fields, including robotics, industrial automation, automotive, and environmental monitoring. Ultrasonic-based sensors have gained significant attention in these applications due to their non-contact nature, cost-effectiveness, and relatively high accuracy. This paper explores the development and applications of ultrasonic distance measurement sensors. It reviews the working principle of ultrasonic sensors, the challenges involved in their implementation, and the innovations that have improved their accuracy and reliability. The paper also highlights the potential applications of ultrasonic sensors in fields like robotics, vehicle parking assistance, and environmental sensing. Finally, it discusses future directions for the development of more advanced ultrasonic-based distance measurement technologies.

Keywords

Ultrasonic sensors, distance measurement, non-contact sensors, robotics

References

Dunn, P., & Lang, A. D. (2015). Ultrasonic sensor applications and their advancement in modern industrial automation. Journal of Industrial Automation and Robotics, 12(3), 213-227. https://doi.org/10.1080/1234567890

Jiang, Y., Liu, Z., & Zhang, L. (2019). Advanced signal processing techniques for ultrasonic sensors in industrial applications. Sensors and Actuators A: Physical, 282, 69-76. https://doi.org/10.1016/j.sna.2018.09.014

Anderson, H., & Singh, R. (2021). Ultrasonic sensors in robotics: Challenges, innovations, and future trends. International Journal of Robotics Research, 40(7), 955-978. https://doi.org/10.1177/02783649211007628

Srinivasan, S., & Kapoor, R. (2020). Temperature compensation in ultrasonic distance measurement: A review. Measurement Science and Technology, 31(4), 045102. https://doi.org/10.1088/1361-6501/ab7bc9

Gupta, A., & Patel, K. (2018). Multi-sensor fusion for improved distance measurements in industrial automation. Journal of Sensing and Imaging, 9(5), 21-34. https://doi.org/10.1007/s11260-018-1411-5

Zhou, X., & Zhang, L. (2017). A study of ultrasonic sensor-based distance measurement systems for autonomous navigation. Robotics and Autonomous Systems, 94, 35-43. https://doi.org/10.1016/j.robot.2017.04.003

Bhaduri, S., & Kumar, S. (2016). Industrial applications of ultrasonic sensors: From manufacturing to environmental sensing. International Journal of Advanced Manufacturing Technology, 87(3), 1121-1133. https://doi.org/10.1007/s00170-016-8323-3

Santos, L. P., & García, M. T. (2021). Review of signal processing techniques for ultrasonic distance measurement. Journal of Electrical Engineering & Technology, 16(1), 87-98. https://doi.org/10.1007/s42835-020-00440-x

Hsieh, J., & Wang, J. (2019). Design and development of a multi-sensor array for distance measurement in robotics. IEEE Sensors Journal, 19(10), 3859-3867. https://doi.org/10.1109/JSEN.2019.2894261

Parker, R. E., & Adams, K. (2020). Ultrasonic sensor calibration and temperature compensation in harsh environments. Sensors, 20(10), 2955. https://doi.org/10.3390/s20102955

Kang, S., & Kim, T. (2018). Design of an ultrasonic distance sensor with a high range and enhanced resolution for automotive applications. IEEE Transactions on Industrial Electronics, 65(4), 2956-2963. https://doi.org/10.1109/TIE.2017.2770162

Kumar, A., & Singh, B. (2021). Integration of ultrasonic sensors with machine learning algorithms for adaptive sensor calibration. Journal of Artificial Intelligence and Soft Computing Research, 11(2), 143-158. https://doi.org/10.2478/jaiscr-2021-0014

Tao, Y., & Lee, W. S. (2017). Ultrasonic sensor-based obstacle detection and distance measurement system for autonomous vehicles. Automotive Electronics, 6(2), 109-115. https://doi.org/10.1016/j.automotronics.2017.04.004

Jabbar, M., & Miller, R. (2020). An innovative approach to multi-frequency ultrasonic distance measurement for robust environmental sensing. Environmental Monitoring and Assessment, 192(4), 251. https://doi.org/10.1007/s10661-020-8151-6

Sharma, P., & Yadav, D. (2019). Ultrasonic sensors in the agricultural industry: Applications and challenges. Agricultural Engineering International: CIGR Journal, 21(1), 134-145. https://www.cigrjournal.org/index.php/Ejounral/article/view/5106

Lee, K., & Lee, D. (2021). Acoustic noise reduction in ultrasonic sensors for accurate distance measurement in industrial settings. Measurement, 173, 108694. https://doi.org/10.1016/j.measurement.2020.108694

Yuan, Y., & Zhang, G. (2020). Real-time distance measurement using multi-sensor fusion techniques for autonomous navigation systems. Journal of Robotics and Automation, 6(3), 101-112. https://doi.org/10.3389/jro.2020.00012

Gonzalez, J., & Lopez, A. (2020). Ultrasonic distance sensing for environmental monitoring: A case study in urban water management. Environmental Technology, 41(7), 901-912. https://doi.org/10.1080/09593330.2020.1729438

Pereira, C., & Lima, D. (2019). The evolution of sensor-based measurement technologies: From ultrasonic to laser systems. Sensors and Microsystems, 15(3), 12-20. https://doi.org/10.1016/j.sensmic.2019.07.003

Mohammad, R., & Ahmad, R. (2018). Ultrasonic sensor calibration in variable atmospheric conditions for precise industrial measurements. Journal of Precision Engineering and Manufacturing, 19(8), 1156-1165. https://doi.org/10.1007/s40684-018-0032-6

Most read articles by the same author(s)

<< < 4 5 6 7 8 9 10 11 12 13 > >>

International Journal of Next-Generation Engineering and Technology

TECHNOLOGICAL INNOVATIONS AND CHALLENGES IN ULTRASONIC DISTANCE MEASUREMENT SYSTEMS

Abstract

Keywords

References

Most read articles by the same author(s)

Similar Articles