Open Access

Next-Generation Test Automation: Integrating Artificial Intelligence with Software Quality Engineering

PDF

Hoang Thanh Nam ¹ ,

⁴ Department of Artificial Intelligence, Institute of Advanced Information Technology, Hanoi, Vietnam

Abstract

Software quality engineering is undergoing a transition from predominantly rule-based test automation toward intelligent, adaptive, and data-driven validation. Traditional automation improves execution speed and repeatability, but its effectiveness becomes constrained when software systems exhibit changing interfaces, complex dependencies, large state spaces, and continuously evolving requirements. This research develops a conceptual framework for integrating artificial intelligence (AI) with software quality engineering by interpreting test automation as an adaptive control and optimization problem. The methodological foundation is derived exclusively from the supplied literature, particularly studies concerning motion control, multicriteria optimization, adaptive behavior, energy-efficient operation, stability, and modeling of complex interacting systems. Although these references originate primarily in robotics and mechanics, their theoretical constructs provide transferable principles for intelligent software testing. The proposed framework combines test-case generation, prioritization, execution monitoring, defect-risk assessment, feedback-based adaptation, and optimization into a closed quality-engineering loop. The analysis indicates that AI-enhanced automation can be conceptually understood as a system that observes software behavior, evaluates quality states, selects testing actions, and continuously updates its testing strategy. The study further identifies limitations associated with model uncertainty, training data quality, explainability, false positives, computational overhead, and inadequate validation criteria. The resulting framework provides a theoretically grounded basis for designing next-generation automated testing systems while highlighting the need for empirical validation on real software-development environments.

Keywords

Artificial Intelligence, Software Quality Engineering, Test Automation, Intelligent Testing

References

P. Bessonov and N. V. Umnov, “K voprosu o sistematike pokhodok shagayu shchikh mashin [On the question of the systematics of walking machine gaits],” Mashino vedeniye, no. 6, p. 23, 1975.

N. N. Bogolyubov, Selected Works. In 3 volumes, vol. 1. Kiev, 1969, pp. 643.

E. S. Briskin, Y. V. Kalinin, A. V. Maloletov, V. A. Shurygin, “Assessment of the performance of walking robots by multicriteria optimization of their parameters and algorithms of motion,” J. Comput. Syst. Sci. Int., vol. 56, no. 2, pp. 334–342, 2017.

E. S. Briskin, Y. V. Kalinin, A. V. Maloletov, V. A. Serov, and S. A. Ustinov, “On controlling the adaptation of orthogonal walking movers to the supporting surface,” J. Comput. Syst. Sci. Int., vol. 56, no. 3, pp. 519–526, 2017.

E. S. Briskin, Ya. V. Kalinin, A. V. Maloletov, and V. A. Shurygin, “Assessment of the performance of walking robots by multicriteria optimization of their parameters and algorithms of motion,” J. Comput. Syst. Sci. Int., vol. 56, no. 2, pp. 334–342, 2017.

E. S. Briskin, Y. V. Kalinin, and M. V. Miroshkina, “Energy efficient modes of the motion of mobile robots with orthogonal stepping motors when overcoming obstacles,” J. Comput. Syst. Sci. Int., vol. 59, no. 2, pp. 209–216, 2020.

V. V. Chernyshev and V. V. Arykantsev, “Modelirovaniye dinamiki shtampovoy ustanovki pri vzaimodeystvii s podvodnym gruntom [Modeling the dynamics of the stamp installation in contact with underwater soil],” Izvestiya VSTU, vol. 25, no. 152, pp. 11–14, 2014.

V. V. Chernyshev, A. A. Goncharov, and V. V. Arykantsev, “Modeling of vibroimpact processes which occurs in feet changing of the walking units at viscoelastic grounds,” Procedia Engineering Ser. Proc. 3rd Int. Conf. Dynamics and Vibroacoustics of Machines, DVM 2016, pp. 387–393, 2017.

Y. F. Golubev, Osnovy teoreticheskoy mekhaniki (Fundamentals of Theoretical Mechanics). M.: Izd-vo MGU, 1992, pp. 524.

M. Koohmishi and F. Azarhoosh, “Assessment of drainage and filtration of sub-ballast course considering effect of aggregate gradation and subgrade condition,” Transp. Geotech., vol. 24, 100378,M. Lyapunov, General Problem of Motion Stability. M. - L., Gostekhizdat, 1950, pp. 287.

Memon, A. Li, N. Jacqueline, M. Kashif, and M. Ma, “Study of gas sorption, stress effects and analysis of effective porosity and permeability for shale gas reservoirs,” J. Petrol. Sci. Eng., vol. 193, 107370, 2020.Poincaré, Selected Works. In 3 volumes, vols. 1–3. M., Nauka, 1971–1974.

Z. Yao, Z. Chen, X. Fang, W. Wang, W. Li, and L. Su, “Elastoplastic damage seepage-consolidation coupled model of unsaturated undisturbed loess and its application,” Acta Geotech., vol. 15. no. 6, pp. 1637–1653, 2020.

Philip, P. G. (2025). Explainable Artificial Intelligence (XAI) for Project Governance: Improving Transparency and Stakeholder Trust in Automated Project Decision. Journal of Project Management Studies, 2(1), 37–55. https://doi.org/10.58425/jpms.v2i1.570

Ramamurthy, K. (2023). AI-Driven Test Automation Frameworks for the Modern Software Quality Engineering. International Journal of Emerging Trends in Computer Science and Information Technology, 4(4), 257-269.

Most read articles by the same author(s)

<< < 2 3 4 5 6 7 8 9 10 11 > >>

International Journal of Advanced Artificial Intelligence Research

Next-Generation Test Automation: Integrating Artificial Intelligence with Software Quality Engineering

Abstract

Keywords

References

Most read articles by the same author(s)

Similar Articles