Open Access

Optimization of Hydraulic System Operation in Agricultural Machinery for The Purpose of Reducing Energy Consumption

PDF

Veherinskyi Taras Ihorovych ¹ ,

⁴ Companys president Honix Express LLC and Fixrent Corp Aurora IL, USA

Abstract

The study examines the principal directions for enhancing hydraulic systems of agricultural machinery to increase their energy efficiency. The relevance of the work is driven by rising energy resource prices and tightening environmental requirements, which necessitate the implementation of resource-saving solutions in agro-industrial complexes. The objective of the research is to classify and analyze contemporary methods for improving the energy efficiency of hydraulic circuits in tractors and combines, including through the use of advanced components, intelligent control algorithms, and innovative technologies for repair and modernization. The methodological foundation comprised a review of scientific publications, synthesis of advanced practical experience, and a comparative investigation of various hydraulic system architectures. The results demonstrated that the application of Load-Sensing (LS) and electrohydraulic (EH) control systems can reduce fuel consumption depending on the operating mode. The economic and technological justification for employing progressive methods of restoring worn components is also shown, contributing to reduced operational costs and maintenance of the hydraulic system near its optimal performance. Based on the obtained data, a comprehensive approach has been formulated, envisaging the combination of installation of modern assemblies and precision restoration of components. The information presented in this work will be of interest to designers, service engineers, and managers of agricultural enterprises focused on improving production profitability and environmental sustainability.

Keywords

hydraulic system, energy efficiency, agricultural machinery, Load-Sensing, electrohydraulic control, energy consumption reduction, component restoration, optimization, tractor, fuel consumption.

References

International Energy Agency. (n.d.). Data and statistics. Retrieved from: https://www.iea.org/data-and-statistics(date accessed: January 18, 2024).

Kargwal, R., Yadvika, Kumar, A., Garg, M. K., & Chanakaewsomboon, I. (2022). A review on global energy use patterns in major crop production systems. Environmental Science: Advances, 1(5), 662–679. https://doi.org/10.1039/D2VA00126H

Beltrami, D., Iora, P., Tribioli, L., & Uberti, S. (2021). Electrification of compact off-highway vehicles—Overview of the current state of the art and trends. Energies, 14(17), 5565. https://doi.org/10.3390/en14175565

Wang, L., Wang, Y., Dai, D., Wang, X., & Wang, S. M. (2021). Review of electro-hydraulic hitch system control method of automated tractors. International Journal of Agricultural and Biological Engineering, 14(3), 1–11. https://doi.org/10.25165/j.ijabe.20211403.6175

Kumar, S., Tewari, V. K., Bharti, C. K., & Ranjan, A. (2021). Modeling, simulation and experimental validation of flow rate of electro-hydraulic hitch control valve of agricultural tractor. Flow Measurement and Instrumentation, 82, 102070. https://doi.org/10.1016/j.flowmeasinst.2021.102070

Zhu, Z., Yang, Y., Wang, D., Cai, Y., & Lai, L. (2022). Energy saving performance of agricultural tractor equipped with mechanic-electronic-hydraulic powertrain system. Agriculture, 12(3), 436. https://doi.org/10.3390/agriculture12030436

Li, R., Sun, Q., Ding, X., Zhang, Y., Yuan, W., & Wu, T. (2022). Review of flow-matching technology for hydraulic systems. Processes, 10(12), 2482. https://doi.org/10.3390/pr10122482

RWTH Aachen University, Institute for Fluid Power Drives and Systems. (n.d.). 13th IFK 2022. Retrieved from: https://www.ifas.rwth-aachen.de/cms/ifas/das-institut/internationales-fluidtechnisches-kolloqu/vergangene-ifks/~wfiau/13-ifk/?lidx=1 (date accessed: February 21, 2024).

Skowrońska, J., Kosucki, A., & Stawiński, Ł. (2021). Overview of materials used for the basic elements of hydraulic actuators and sealing systems and their surfaces modification methods. Materials, 14(6), 1422. https://doi.org/10.3390/ma14061422

Hu, H., Mao, L., Yin, S., Liao, H., & Zhang, C. (2022). Wear-resistant ceramic coatings deposited by liquid thermal spraying. Ceramics International, 48(22), 33245–33255. https://doi.org/10.1016/j.ceramint.2022.07.267

Bertolin, M., & Vacca, A. (2022). A power-split hybrid transmission to drive conventional hydraulic valve controlled architectures in off-road vehicles: The case of a mini-excavator. JFPS International Journal of Fluid Power System, 15(2), 62–70. https://doi.org/10.5739/jfpsij.15.62

Fresia, P., Rundo, M., Padovani, D., & Altare, G. (2022). Combined speed control and centralized power supply for hybrid energy-efficient mobile hydraulics. Automation in Construction, 140, 104337. https://doi.org/10.1016/j.autcon.2022.104337

Parker Hannifin Corporation. (n.d.). The handbook of hydraulic filtration. Retrieved from: https://www.parker.com/content/dam/Parker-com/Literature/EMHFF/Miscellaneous/HTM-5.pdf (date accessed: March 12, 2024).

Most read articles by the same author(s)

<< < 6 7 8 9 10 11 12 13 > >>

International Journal of Next-Generation Engineering and Technology

Optimization of Hydraulic System Operation in Agricultural Machinery for The Purpose of Reducing Energy Consumption

Abstract

Keywords

References

Most read articles by the same author(s)

Similar Articles