Open Access
HYDRAULIC FRACTURING IN OIL AND GAS WELLS: TECHNIQUES, INNOVATION, AND ENVIRONMENTAL IMPACTS
4
Department of Energy, University of Sao Paulo, Brazil
Abstract
Hydraulic fracturing (fracking) is a widely adopted technique for enhancing the production of oil and gas from unconventional reservoirs. Well stimulation using hydraulic fracturing improves the flow of hydrocarbons from reservoir rock to the wellbore. This article provides a detailed exploration of the fundamental principles, technological advancements, challenges, and environmental concerns associated with hydraulic fracturing. By reviewing recent literature and industry practices, we discuss the key components of well stimulation, the types of fluids and proppants used, and the processes involved in hydraulic fracturing. Furthermore, we examine the operational and environmental considerations that must be addressed to optimize hydraulic fracturing while minimizing negative ecological impacts. This article concludes by highlighting future trends and innovations in well stimulation technology.
Keywords
Hydraulic Fracturing,
Well Stimulation,
Proppants,
Reservoir Engineering
References
Agarwal, M., & Kudapa, V. K. (2022a). Comparing the performance of supercritical CO2 fracking with high energy gas fracking in unconventional shale. MRS Energy & Sustainability, 1-8.
Agarwal, M., & Kudapa, V. K. (2022b). Plasma-based fracking in unconventional shale â A review. Materials Today: Proceedings.
Agarwal, M., & Kudapa, V. K. (2022c). Foam-based fracking in unconventional shale reservoir. Materials Today: Proceedings.
Ben-Naceur, K., & Economides, M. J. (1988, November). The effectiveness of acid fractures and their production behavior. In SPE Eastern Regional Meeting. OnePetro.
Cipolla, C. L., Lolon, E., Erdle, J., & Tathed, V. S. (2009, October). Modeling well performance in shale-gas reservoirs. In SPE/EAGE Reservoir Characterization and Simulation Conference. OnePetro.
Clark, J. B. (1949). A hydraulic process for increasing the productivity of wells. Journal of Petroleum Technology, 1(1), 1-8.
Cook, C. C., & Brekke, K. (2002, February). Productivity preservation via hydraulic propped fractures in the Eldfisk North Sea chalk field. In International Symposium and Exhibition on Formation Damage Control. OnePetro.
Daneshy, A. (2010). Hydraulic fracturing to improve production. The Way Ahead, 6(3), 14-17.
Dora, T. K., Iqbal, M. I., Krishna, K. V., Mahapatra, S. R., Alnuumani, M. A., & Al Rajawy, I. (2022). Application of low-temperature fracturing fluid system in oil reservoirâA breakthrough approach. Materials Today: Proceedings, 68, 780-784.
Fredd, C. N., McConnell, S. B., Boney, C. L., & England, K. W. (2000, March). Experimental study of hydraulic fracture conductivity demonstrates the benefits of using proppants. In SPE Rocky Mountain Regional/Low-Permeability Reservoirs Symposium and Exhibition. OnePetro.
Kudapa, V. K., Kumar, S., Gupta, D. K., Sharma, P., & KunhAbdulla, R. (2017b, May). Modelling of gas production from shale matrix to fracture network. In SPE Intelligent Oil and Gas Symposium. OnePetro.
Kudapa, V. K., Sharma, P., Kunal, V., & Gupta, D. K. (2017a). Modeling and simulation of gas flow behavior in shale reservoirs. Journal of Petroleum Exploration and Production Technology, 7(4), 1095-1112.
Li, Y., Wang, Y., Cheng, X., Che, M., Zhang, F., & Peng, J. (2009, January). Propped fracturing in high temperature deep carbonate formation. In SPE Hydraulic Fracturing Technology Conference. OnePetro.
Mayrhofer, K. J. J., Strmcnik, D., Blizanac, B. B., Stamenkovic, V., Arenz, M., & Markovic, N. M. (2008). Measurement of oxygen reduction activities via the rotating disc electrode method: From Pt model surfaces to carbon-supported high surface area catalysts. Electrochimica Acta, 53(7), 3181-3188.
Mayrhofer, S., Van Hoek, A. H., Mair, C., Huys, G., Aarts, H. J., Kneifel, W., & Domig, K. J. (2010). Antibiotic susceptibility of members of the Lactobacillus acidophilus group using broth microdilution and molecular identification of their resistance determinants. International Journal of Food Microbiology, 144(1), 81-87.
Nagel, N., Gil, I., Sanchez-Nagel, M., & Damjanac, B. (2011, January). Simulating hydraulic fracturing in real fractured rocksâovercoming the limits of pseudo3D models. In SPE Hydraulic Fracturing Technology Conference. OnePetro.
Navarre, S. E. (1998). Salvador Minuchin's structural family therapy and its application to multicultural family systems. Issues in Mental Health Nursing, 19(6), 557-570.
Roberts, L. D., & Guin, J. A. (1975). A new method for predicting acid penetration distance. Society of Petroleum Engineers Journal, 15(4), 277-286.
RĂŒckheim, J., Voigtlaender, G., & Stein-Khokhlov, M. (2005, June). The technical and economic challenge of mature gas fields: The giant Altmark field, a German example. In SPE Europec/EAGE Annual Conference. OnePetro.
Soliman, M. S. M., Abdel-Rahman, E. M., El-Saadany, E. F., & Mansour, R. R. (2008). A wideband vibration-based energy harvester. Journal of Micromechanics and Microengineering, 18(11), 115021.
Veatch, R. W., & Moschovidis, Z. A. (1986, March). An overview of recent advances in hydraulic fracturing technology. In International Meeting on Petroleum Engineering. OnePetro.
Vega, G., Negron-Perez, E., & Abass, H. (1997, August). Hydraulic fracturing hot, high pressure oil and gas wells in tectonically active fields in Eastern Venezuela. In Latin American and Caribbean Petroleum Engineering Conference. OnePetro.
Wang, Y., Zhang, F., Cheng, X., Peng, J., Li, Y., & Li, S. (2006, May). A case study: Re-fracturing of high temperature deep well in carbonate reservoir. In SPE Technical Symposium of Saudi Arabia Section. OnePetro.
Warpinski, N. R., Mayerhofer, M. J., Vincent, M. C., Cipolla, C. L., & Lolon, E. P. (2009). Stimulating unconventional reservoirs: maximizing network growth while optimizing fracture conductivity. Journal of Canadian Petroleum Technology, 48(10), 39-51.
Wedman, M. L., Lynch, K. W., & Spearman, J. W. (1999, May). Hydraulic fracturing for sand control in unconsolidated heavy-oil reservoirs. In SPE Western Regional Meeting. OnePetro.
Zoveidavianpoor, M., Samsuri, A., & Shadizadeh, S. R. (2011, March). The needs for hydraulic fracturing in Iranian carbonate oilfields: Acid or propped fracture? In 1st National Conference of Novel Technologies in Oil & Gas Industries, IAU, Iran (pp. 3-4).
Most read articles by the same author(s)
- Dr. Thabo Ndlovu, Application of Interactive Data Systems and Modern Visualization Environments for Immediate Analysis , International Journal of Next-Generation Engineering and Technology: Vol. 3 No. 03 (2026): Volume 03 Issue 03
- Dr. Arjun Mehta, Dr. Priya Nair, An Integrated Architecture for Enhancing Data Security in Cross-Platform Mobile Apps Using React Native , International Journal of Next-Generation Engineering and Technology: Vol. 3 No. 05 (2026): Volume 03 Issue 05
- Dr. Melissa A. Hooper, Dr. Leonardo Carvalho, BIO-INSPIRED CERAMIC/RESIN COMPOSITES FOR ADVANCED LIQUID COOLING: 3D PRINTED LEAF-VEIN ARCHITECTURES FOR ENHANCED THERMAL MANAGEMENT , International Journal of Next-Generation Engineering and Technology: Vol. 1 No. 01 (2024): Volume 01 Issue 01
- Dr. Ahmed A. Al-Mansoori, Dr. Fatimah H. Zayed, RENEWABLE DISTRIBUTED GENERATION: TRANSFORMING POWER SYSTEMS FOR A SUSTAINABLE FUTURE , International Journal of Next-Generation Engineering and Technology: Vol. 2 No. 04 (2025): Volume 02 Issue 04
- Dr. Saeed Mazrouei, Governance Standards for Intelligent Systems in National Resource Allocation: A Diverse Sector Analysis , International Journal of Next-Generation Engineering and Technology: Vol. 3 No. 01 (2026): Volume 03 Issue 01
- Dr. Prathviraj Singh Rathore, A Review of Smart Manufacturing Supply Chain Management Focusing on Automation Predictive Analytics Sustainability Resilience , International Journal of Next-Generation Engineering and Technology: Vol. 3 No. 07 (2026): Volume 03 Issue 07
- Alejandro M. CortĂ©s, A Profit-Oriented and Machine LearningâDriven Framework for Advancing Credit Risk Prediction in Modern Financial Systems , International Journal of Next-Generation Engineering and Technology: Vol. 2 No. 09 (2025): Volume 02 Issue 09
- Dr. Michael R. Thompson, Architecting Scalable Leader Selection and Community-Aware Coordination in Distributed Systems: A Submodular and Network-Theoretic Perspective , International Journal of Next-Generation Engineering and Technology: Vol. 2 No. 12 (2025): Volume 02 Issue 12
- Mateo Laurent Dubois, Adaptive Chaos Engineering and AI-Driven Dependability Modeling for Resilient Cloud-Native and Safety-Critical Systems , International Journal of Next-Generation Engineering and Technology: Vol. 3 No. 01 (2026): Volume 03 Issue 01
- Dr. Marc Casal, Bio-Inspired Predictive Layered Architecture targeting Online Data Flow Anomaly Discovery , International Journal of Next-Generation Engineering and Technology: Vol. 3 No. 05 (2026): Volume 03 Issue 05
Similar Articles
- Dr. Rebecca Lopez, THE ROLE OF STRESS AND STRAIN IN MODULATING GAS PRODUCTION FROM SHALE , International Journal of Next-Generation Engineering and Technology: Vol. 2 No. 06 (2025): Volume 02 Issue 06
- Wei Zhang, Liang Chen, Advanced Process Optimization Framework for Enhancing Biogranule Development Using Static Mixers in Aerobic Textile Wastewater Treatment Systems , International Journal of Next-Generation Engineering and Technology: Vol. 3 No. 05 (2026): Volume 03 Issue 05
- Mateo Laurent Dubois, Adaptive Chaos Engineering and AI-Driven Dependability Modeling for Resilient Cloud-Native and Safety-Critical Systems , International Journal of Next-Generation Engineering and Technology: Vol. 3 No. 01 (2026): Volume 03 Issue 01
- Prof. Kavita Menon, An In-Depth Review of Recent Advances in Cables and Towed Objects for Ocean Engineering Towing Systems , International Journal of Next-Generation Engineering and Technology: Vol. 2 No. 08 (2025): Volume 02 Issue 08
- Dr. Ahmad Fauzan Nugroho, Intelligent CAD-Based Framework for Automating Design Optimization and Rapid Prototyping in Engineering Systems , International Journal of Next-Generation Engineering and Technology: Vol. 3 No. 06 (2026): Volume 03 Issue 06
- Veherinskyi Taras Ihorovych, Optimization of Hydraulic System Operation in Agricultural Machinery for The Purpose of Reducing Energy Consumption , International Journal of Next-Generation Engineering and Technology: Vol. 1 No. 01 (2024): Volume 01 Issue 01
- Elena M. Hartwell, Prof. Daniel K. Mercer, Dr. Sofia M. Alvarez, Adaptive and Secure Dynamic Voltage Restoration in Smart Power Networks: A Text-Based Integrative Research Study on PI-Controlled DVRs, Converter Coordination, Energy Management, and Cyber-Physical Resilience , International Journal of Next-Generation Engineering and Technology: Vol. 3 No. 04 (2026): Volume 03 Issue 04
- Samnardo Martins, AI-Augmented Paradigms In Enterprise Software Refactoring And Development: A Comprehensive Analysis Of Contemporary Approaches And Theoretical Implications , International Journal of Next-Generation Engineering and Technology: Vol. 1 No. 01 (2024): Volume 01 Issue 01
- Dr. Arjun Mehta, Dr. Priya Nair, An Integrated Architecture for Enhancing Data Security in Cross-Platform Mobile Apps Using React Native , International Journal of Next-Generation Engineering and Technology: Vol. 3 No. 05 (2026): Volume 03 Issue 05
- Andras Varga, A Socio-Technical Framework for Error BudgetâDriven Reliability Governance in Cloud-Native and Edge-Integrated Distributed Systems , International Journal of Next-Generation Engineering and Technology: Vol. 3 No. 01 (2026): Volume 03 Issue 01
1-10 of 59
Next
You may also start an advanced similarity search for this article.